stunthanger.com

General control line discussion => Open Forum => Topic started by: Mike Griffin on August 26, 2010, 02:23:39 PM

Title: Kit Survey for Profile Stuka
Post by: Mike Griffin on August 26, 2010, 02:23:39 PM
Here is the next kit I will be producing. It is the profile Stuka.
I Will be offering a short kit consisting of laser cut Ribs and doublers and plans for $65.00 and a full kit for $125.00.

However I would like to modify the wing a little to make it stronger and fly better. Instead of using the 1/2 ribs like a Twister, I would like to eliminate the half ribs and sheet the leading edge and apply cap strips.

This is going to be a fairly limited run so please let me know if you would like to be put on the waiting list.

Here are the dimensions

Wingspan - 50.5 Inches
Wing Area - 535 Sq In
Nose Moment - 8.03 In
Tail Moment - 12.78 In
Overall Length - 32.48 In


I have set up the following e mail for orders and confirmations

profilestuka@yahoo.com

Thanks for all your support

Mike
Title: Re: Kit Survey for Profile Stuka
Post by: Dan Labine on August 26, 2010, 04:14:16 PM
Hi Mike..

One of my favourite planes. I`ll take two full kits..

Dan
Title: Re: Kit Survey for Profile Stuka
Post by: john e. holliday on August 26, 2010, 07:37:00 PM
Email sent.   H^^
Title: Re: Kit Survey for Profile Stuka
Post by: Mike Griffin on August 27, 2010, 07:38:03 AM
Thanks Guys,,,  I have you on the list

Mike
Title: Re: Kit Survey for Profile Stuka
Post by: Dalton Hammett on August 28, 2010, 10:02:52 AM
Hi Mike

     I think I am on you list for this one ---  full kit.........

Dalton H.
Title: Re: Kit Survey for Profile Stuka
Post by: Mike Griffin on August 28, 2010, 12:32:20 PM
Yes Dalton.  I have you down for one...Thank you

Mike