stunthanger.com

General control line discussion => Open Forum => Topic started by: Bootlegger on September 17, 2014, 07:18:32 AM

Title: kbs diamond coat
Post by: Bootlegger on September 17, 2014, 07:18:32 AM

 Guy's I don't remember where I read about spraying this stuff, but if you sprayed it tell me what you used for thinner, how much you thinned it and what gun (hvlp or syphon) and what pressure that you sprayed at, plus any other suggestions that you have in regards to using this paint.

      Thanks a lot

Title: Re: kbs diamond coat
Post by: David_Stack on September 17, 2014, 10:48:59 AM

Good Afternoon Gil;

  Take a read through this thread: http://stunthanger.com/smf/index.php/topic,31735.0.html.  Looks like most were brushing it on, but there is at least one post from a builder who used an airbrush to spray it.

r/
Dave

Title: Re: kbs diamond coat
Post by: Bootlegger on September 17, 2014, 10:59:32 AM

 Thank you Sir, I found the posting after I had asked.  Again thanks...