News:


  • June 21, 2025, 02:56:25 PM

Login with username, password and session length

Author Topic: Just in time for "Fathers Day"  (Read 2056 times)

Offline builditright

  • 2016 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1043
  • So happy to be alive!
Just in time for "Fathers Day"
« on: June 12, 2011, 10:01:51 AM »
This morning my son Matthew became a new father,
so let me introduce you all to my new (1st.) Grandson

"Bryce Logan Umland"

The new Mom and Dad are doing okay.  
« Last Edit: June 14, 2011, 02:24:02 AM by builditright »
Thank you and God Bless
Walter
aka/ builditright

Offline Tom Niebuhr

  • AMA Member
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2767
Re: Just in time for "Fathers Day"
« Reply #1 on: June 12, 2011, 11:16:05 AM »
Congratulations Gramps!
AMA 7544

Offline mike hartung

  • aeronut
  • Trade Count: (0)
  • Lieutenant
  • ***
  • Posts: 106
Re: Just in time for "Fathers Day"
« Reply #2 on: June 12, 2011, 01:05:00 PM »
Way to go gramps, I hope your holding up well from the stress of child birth. ;)
blue skys and tail winds to all.

Offline john e. holliday

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 22975
Re: Just in time for "Fathers Day"
« Reply #3 on: June 12, 2011, 01:09:12 PM »
Congradulations Grandpa.  Now for the new handle for teething.  H^^
John E. "DOC" Holliday
10421 West 56th Terrace
Shawnee, KANSAS  66203
AMA 23530  Have fun as I have and I am still breaking a record.

Offline Jim z

  • Trade Count: (0)
  • Lieutenant
  • ***
  • Posts: 59
Re: Just in time for "Fathers Day"
« Reply #4 on: June 12, 2011, 02:08:02 PM »
Congratulations!

Offline Larry Renger

  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 4056
Re: Just in time for "Fathers Day"
« Reply #5 on: June 12, 2011, 02:33:36 PM »
Laser cut circumcision?   VD~  LL~  n1
Think S.M.A.L.L. y'all and, it's all good, CL, FF and RC!

DesignMan
 BTW, Dracula Sucks!  A closed mouth gathers no feet!

Offline Bill Little

  • 2017
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 12668
  • Second in COMMAND
Re: Just in time for "Fathers Day"
« Reply #6 on: June 12, 2011, 02:35:08 PM »
Congratulations to you and the parents, Walter.  God Bless them both.

Grandkids are very special.

Big Bear
Big Bear <><

Aberdeen, NC

James Hylton Motorsports/NASCAR/ARCA

AMA 95351 (got one of my old numbers back! ;D )

Trying to get by

Online Paul Taylor

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 6598
  • If God is your Co-pilot - swap seats!
    • Our Local CL Web Page
Re: Just in time for "Fathers Day"
« Reply #7 on: June 12, 2011, 04:02:52 PM »
Congratulations !


HAPPY BIRTHDAY to Brice (051)
« Last Edit: June 12, 2011, 06:15:15 PM by Paul Taylor »
Paul
AMA 842917

As my coach and mentor Jim Lynch use to say every time we flew together - “We are making memories

Offline builditright

  • 2016 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1043
  • So happy to be alive!
Re: Just in time for "Fathers Day"
« Reply #8 on: June 12, 2011, 06:03:04 PM »
okay just back from seeing the new Grandson.

Kerry (new Mom) is doing okay after 32 hours labor
Dr. decided to do a C-section.

My Son Matthew seems to be a bit more on the nervous side.
They went to give me the baby and Matt says.. Dad wash your hands before holding him... hold him this way, hold him that way, his head's to low, oh! thats to high.  You get the idea.   HB~> HB~>

I don't know I think he forgets that I had 5 children and he's one of them. God I hope he doesn't have a nervous break down. LOL !   LL~ LL~


Okay back to Brice.

8 lbs. 13 oz.
20.5" long
Thank you and God Bless
Walter
aka/ builditright

Offline Alan Hayes

  • 25 supporter
  • Trade Count: (0)
  • Lieutenant
  • *
  • Posts: 83
Re: Just in time for "Fathers Day"
« Reply #9 on: June 12, 2011, 07:49:33 PM »
Congratulations to you and the new parents.   H^^

Alan
AMA 7064

"The measure of who we are is what we do with what we have" ~ Vince Lombardi

Offline wwwarbird

  • 2016 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 8084
  • Welcome to the Stunt Hanger.
Re: Just in time for "Fathers Day"
« Reply #10 on: June 12, 2011, 08:17:08 PM »
 Congrats to all! y1
Narrowly averting disaster since 1964! 

Wayne Willey
Albert Lea, MN U.S.A. IC C/L Aircraft Modeler, Ex AMA member

Offline john e. holliday

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 22975
Re: Just in time for "Fathers Day"
« Reply #11 on: June 13, 2011, 08:00:26 AM »
Hey Granpa,  been there and done that with all three of my daughters.  I just looked at them and said, "You don't remember changed that nasty diaper on you".   I think Grandma was the worst in telling me how to hold a new born.   What was fun was when my oldest made me late leaving for VSC the year she had her second daughter.   I was holding the newborn(Emmy) when the oldest came up to my lap (Savannah) and looked at me.   I coaxed her up on my other arm and then told her there was room enough for both of them.   Can't say that anymore as they are now 16 and 15.   Sorry to steal your post. H^^
John E. "DOC" Holliday
10421 West 56th Terrace
Shawnee, KANSAS  66203
AMA 23530  Have fun as I have and I am still breaking a record.

Offline Roger Vizioli

  • CLiner
  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1170
Re: Just in time for "Fathers Day"
« Reply #12 on: June 13, 2011, 09:38:01 AM »
Congratulations "Grand Pa!"  H^^
Does this mean there will be a line of "Build'emrightRaise'emright" Laser Cut baby toys in the future?  LL~
Take care!
Roger
Roger Vizioli
AMA L-2408
Florida/Space Coast

Offline builditright

  • 2016 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1043
  • So happy to be alive!
Re: Just in time for "Fathers Day"
« Reply #13 on: June 13, 2011, 10:56:44 AM »
Congratulations "Grand Pa!"  H^^
Does this mean there will be a line of "Build'emrightRaise'emright" Laser Cut baby toys in the future?  LL~
Take care!
Roger

between you and Larry R's suggestions I now have two new ideas for using the laser and come to think of it
I just recently experienced first hand R&D on the effects of how the (my) flesh deals with a laser beam.

Laser beam 1 
Flesh 0



 f~ j1
Thank you and God Bless
Walter
aka/ builditright

Offline Neville Legg

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 589
Re: Just in time for "Fathers Day"
« Reply #14 on: June 13, 2011, 10:58:08 AM »
Well done ;D  Hope when he is older he doesn't sign himself  "B Umland"  LL~   Make sure he leaves a big gap between the B and U?


Cheers
"I think, therefore I have problems"

(not) Descartes

Offline jim ivey

  • Trade Count: (0)
  • Commander
  • ****
  • Posts: 347
Re: Just in time for "Fathers Day"
« Reply #15 on: June 13, 2011, 01:01:57 PM »
when iwas a kid I liked chewing on a little piece of new neoprine fuel line. I bet many others did also. Ya know it might be great for teething. How about anold E-Z just handle as a pacifirer. All teasing aside great lookin kid!! I see a lot of fun in your future walt. Congrats #^ <= y1 H^^ 8) jim

Offline Steve Helmick

  • 24 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 10265
Re: Just in time for "Fathers Day"
« Reply #16 on: June 13, 2011, 05:46:11 PM »
Congratulations, WU! I am soooooo...jealous!  y1 Steve

"The United States has become a place where professional athletes and entertainers are mistaken for people of importance." - Robert Heinlein

In 1944 18-20 year old's stormed beaches, and parachuted behind enemy lines to almost certain death.  In 2015 18-20 year old's need safe zones so people don't hurt their feelings.

Offline Dennis Adamisin

  • 2019 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 4400
Re: Just in time for "Fathers Day"
« Reply #17 on: June 13, 2011, 07:06:26 PM »
CONGRATS Gramps!
Denny Adamisin
Fort Wayne, IN

As I've grown older, I've learned that pleasing everyone is impossible, but pissing everyone off is a piece of cake!

Offline builditright

  • 2016 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1043
  • So happy to be alive!
Re: Just in time for "Fathers Day"
« Reply #18 on: June 14, 2011, 02:34:43 AM »
Well done ;D  Hope when he is older he doesn't sign himself  "B Umland"  LL~   Make sure he leaves a big gap between the B and U?


Cheers

Neville, that's been a family joke for years, we have multiple names that when using only the initials are
A U
BU
C U
DU
JU
KU
LU
MU
WU
SU
RU
TU
and there are several aunts, uncles and cousins that I have not seen in years,
and don't even remember the initials  LL~

 
Thank you and God Bless
Walter
aka/ builditright

Offline Neville Legg

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 589
Re: Just in time for "Fathers Day"
« Reply #19 on: June 16, 2011, 03:01:22 AM »
My uncle is HMS Legg, so was my grandfather, obviously we are from a Naval family, from many many years back, I can trace them back to the Battle of Trafalgar. Though my uncle decided to join the 8th Army, during WW2, and my dad the RAF! don't think my Gran was pleased about that? :)

Cheers
"I think, therefore I have problems"

(not) Descartes

Offline John Stiles

  • 2014 Supporters
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1928
  • one shot=one kill
Re: Just in time for "Fathers Day"
« Reply #20 on: June 16, 2011, 05:07:42 AM »
Congrats and welcome to the  GFs club! H^^
John Stiles             Tulip, Ar.

Offline Garf

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 1817
    • Hangar Flying
Re: Just in time for "Fathers Day"
« Reply #21 on: June 16, 2011, 01:25:30 PM »
Laser cut circumcision?   VD~  LL~  n1
Ouch


Advertise Here
Tags: