Jetco Shark .15

[Mike Griffin]

Does anyone kit the old Jetco Shark .15 kit today?

Thank you
Mike

[Dan McEntee]

   Hi Mike;
    As it was kitted by Jetco, no, I don't believe any one has. Penn Valley Hobby in Pennsylvania was reproducing some Jetco kits, but I believe they were all free flight models. Brodak has their Shark 402 that resembles it but is an entirely different airplane.
 HAPPY HOLIDAYS!
Type at you later,
 Dan McEntee

[George Truett]

I'm pretty sure Eddie at Lazer Works has a parts pack for the Shark 15.  All the hard stuff is done but you still need to come up with plans, hardware, gear, controls, hardwood motor mounts, and any sheet wood.  George

[Gary Mondry]

Outerzone has the plans.

[Mike Griffin]

   Hi Mike;
    As it was kitted by Jetco, no, I don't believe any one has. Penn Valley Hobby in Pennsylvania was reproducing some Jetco kits, but I believe they were all free flight models. Brodak has their Shark 402 that resembles it but is an entirely different airplane.
 HAPPY HOLIDAYS!
Type at you later,
 Dan McEntee

Hi Dan

I replied to you on the other forum.  Thank you very much

Mike

[Mike Griffin]

I'm pretty sure Eddie at Lazer Works has a parts pack for the Shark 15.  All the hard stuff is done but you still need to come up with plans, hardware, gear, controls, hardwood motor mounts, and any sheet wood.  George

Thank you George

Mike

[Mike Griffin]

Outerzone has the plans.

I have downloaded them Gary...and thank you.

Mike

[dennis lipsett]

I have downloaded them Gary...and thank you.

Mike

I might be wrong but I think that Walt Umland kitted the Shark 15 quite awhile ago. I'm speculating that it might be the property of John Brodak now. Mike check with Walt first..

Dennis

[Mike Griffin]

I might be wrong but I think that Walt Umland kitted the Shark 15 quite awhile ago. I'm speculating that it might be the property of John Brodak now. Mike check with Walt first..

Dennis

Dennis I will before I produce a kit.  I know John puts out the 402 Shark which is a different airplane.  I checked on Walter's website and the Shark 15 is not listed there.  Thank you.

Mike

[Danny Stewart]

It was a few years back that Walt Umland made a run of Shark 15 kits. I baught two of them very nice kits. They were done off of the Jetco plans.