stunthanger.com

General control line discussion => Open Forum => Topic started by: Bootlegger on February 11, 2012, 12:03:06 PM

Title: Instead of...
Post by: Bootlegger on February 11, 2012, 12:03:06 PM

 What do you substitute for K 2 R spot remover?  I have heard of some sort of a "slurry" mixture, but don't remember where I saw it.
  Any suggestions sure will be appreciated...

Title: Re: Instead of...
Post by: Bill Little on February 11, 2012, 05:50:29 PM

Hi Gil,

I hope we got some ideas over the phone.  I really enjoyed the chat!

BIG Bear
RNMM/AMM

Title: Re: Instead of...
Post by: Bootlegger on February 12, 2012, 04:41:18 PM

  Bill, I always enjoy talkin to you, especially about NASCAR and flyin..
 Refresh my memory please, that is cornstarch and naptha that you recomended isn't it? And again next chat is on my dime...

  Thanks, H^^

Title: Re: Instead of...
Post by: Bill Little on February 12, 2012, 05:31:09 PM

Quote from: Bootlegger on February 12, 2012, 04:41:18 PM

  Bill, I always enjoy talkin to you, especially about NASCAR and flyin..
 Refresh my memory please, that is cornstarch and naptha that you recomended isn't it? And again next chat is on my dime...

  Thanks, H^^

Hi Gil,

Talcum powder and Naptha, but corn starch would probably work, also.

I have unlimited anytime Long Distance, so the cost doesn't matter. LL~

Bill

Title: Re: Instead of...
Post by: Howard Rush on February 12, 2012, 06:11:11 PM

I think the filler in K2R is colloidal silica.  A brand name is Cab-o-Sil, http://www.aircraftspruce.com/catalog/cmpages/cabosil.php .  It is also nice for thickening epoxy, but is a bit heavy.

Title: Re: Instead of...
Post by: Bootlegger on February 13, 2012, 11:54:20 AM

 y1  Thank ya' guy's, I sure do 'ppreciate all the help.. <=