stunthanger.com

General control line discussion => Open Forum => Topic started by: petermick on December 10, 2010, 02:34:08 PM

Title: Incidence meters
Post by: petermick on December 10, 2010, 02:34:08 PM

I need a recommendation for an incidence meter to be used on my new Pathfinder Twin.
Thanks

Peter Mick
AMA 9581

Title: Re: Incidence meters
Post by: John Miller on December 10, 2010, 02:55:00 PM

Robart, the older one with the needles, not the laser. y1

Title: Re: Incidence meters
Post by: Paul Taylor on December 10, 2010, 04:16:19 PM

So how do you use such a tool. I for one could use all the help I can get.

Title: Re: Incidence meters
Post by: Bob Reeves on December 10, 2010, 05:03:01 PM

Quote from: Paul Taylor on December 10, 2010, 04:16:19 PM

So how do you use such a tool. I for one could use all the help I can get.

Order, receive, read instructions  ;D

Title: Re: Incidence meters
Post by: W.D. Roland on December 10, 2010, 05:59:47 PM

Robart Meter
The square box sitting on the  Robart is a digital from Harbor Freight.

Handy little square box digital level, 4 sides to work from.

Lock controls and place box on flap and elevator for front to rear alignment and side(L/R) twist in surfaces.
Also easiest way to check up/down throws.

Cool Tool!

Title: Re: Incidence meters
Post by: Bill Little on December 11, 2010, 11:27:38 AM

We have one of the laser ones.  Always worked well for us, but fidgety....

Big Bear

Title: Re: Incidence meters
Post by: Derek Moran on December 11, 2010, 04:40:11 PM

Make your own!  11/06 MA
Derek