stunthanger.com
General control line discussion => Open Forum => Topic started by: Paul Taylor on December 29, 2011, 12:38:26 PM
-
I was talking to Ryan last night and he said when he comes back home he is taking the Streak Master back with him. LL~ He liked flying it that much.
Guess I lost it to a good cause.
Now I have to rip the wing out of my other flight streak and build another Streak Master. ;D
-
Dang Kids >:D
-
Yeah Baby!
-
Sheeewwwww! For a minute there I thought ya crashed it! LOL.....you did good. ;D
-
Paul,
If you don't want to tear up your Streak, let me sell you a laser cut Streak wing kit. The wing kit would include spar, spar caps, ribs, leading edge, tips, and bellcrank mount. y1
Thanks, Pat
-
Pat, i would love a Streak wing kit! #^ How to order please? Ray Copeland
-
Thanks for the offer Pat. My problem is hangar space. If I can find some one to give this Flite Streak to I might take you up on your offer.
-
Paul,If you don't want to tear up your Streak, let me sell you a laser cut Streak wing kit. The wing kit would include spar, spar caps, ribs, leading edge, tips, and bellcrank mount. y1Thanks, Pat
Pat,
Got any elliptical wing kits, say 59.5" in span. n~
CB
-
CB, build you a Ringmaster and then register for the Brother Hood of the Ring. Classified section has a listing of all of Pat King's and Pat Johnston's plans. H^^
-
I'll "SWAG" a price for the Streak wing kit. Then you can order with an e-mail, pay with PayPal or a check.
Sorry, I do not have any design with an elliptical wing.
Thanks, Pat
-
CB, build you a Ringmaster and then register for the Brother Hood of the Ring. Classified section has a listing of all of Pat King's and Pat Johnston's plans. H^^
John,
"You" will build the Ringmaster? Is that what you're saying? I'll take a peek.
Thanks!
CB
-
I think Doc is telling you to build a RM so you can join the BHoTR site. That will allow you to view Pats list of plans.
But if you read the fine print of the rules you really don't have to own a RM to join. ;D
-
I think Doc is telling you to build a RM so you can join the BHoTR site. That will allow you to view Pats list of plans.
But if you read the fine print of the rules you really don't have to own a RM to join. ;D
That's true, but at least you gotta admit that ya wanna have one!! ;D
-
Had my way and may do it yet, would have at least one of every Ringmaster type ever produced. Right now have the S-1 Ringmaster and the little 1/2A Stuntin Ringmaster(that goes like a bat out of h***).H^^
-
Had my way and may do it yet, would have at least one of every Ringmaster type ever produced. Right now have the S-1 Ringmaster and the little 1/2A Stuntin Ringmaster(that goes like a bat out of h***).H^^
You better get after it on that "Flashback" ;D
-
I think Doc is telling you to build a RM so you can join the BHoTR site. That will allow you to view Pats list of plans.
But if you read the fine print of the rules you really don't have to own a RM to join. ;D
John,
That's not what Doc said. Doc said, "Build you a Ringmaster..."
I'll take him up on that. ;D
What's the largest Ringmaster, 72", lawn mower engine?
CB
-
John,
That's not what Doc said. Doc said, "Build you a Ringmaster..."
I'll take him up on that. ;D
What's the largest Ringmaster, 72", lawn mower engine?
CB
Very Close]...I will refer you to Bill Gruby....better known over there as G-man! LOL
-
A laser cut wing kit for the Streak will be $50.00 plus 8.00 shipping and insurance. It does not include any control hardware, the 3/32 x 2 trailing edge strips, or the 1/16 center planking.
Thanks, Pat
-
Pat, pm sent.
-
CB
The largest Ringmaster I have seen is owned by Bill "G-Man" Gruby. 85 inch Wing Span and something like 1640 Square Inches of Wing Area. Engine is a two cylinder apposed 120.
In the picture G-Man is the "delicate" size man in white shorts holding the wing. LOL
The picture was taken at the 2008 Brodk Fly-In.
Clancy
-
CA,
Hey! Where's the rest of the Ringmaster?
Did it ever get completed and flown?
Yeah Baby!
-
CA,
Hey! Where's the rest of the Ringmaster?
Did it ever get completed and flown?
Yeah Baby!
Here's a link to the build....all 29 pages...you might hafta register to see it: http://www.brotherhoodofthering.info/mbbs22/photos/photo-thumbnails.asp?albumid=22