Help Locating an Article

[Dan McEntee]

    My flying buddy has asked me about an article Joe Daly did the featured photos of his assembly methods of a model and the jig he uses. My buddy has contacted Joe about it, but Joe can't remember it. It may have been a complete article or just a column written by Joe, in the last several years. If that rings a bell with anyone, drop me a line so I can look it up. Pretty sure it had to be in Stunt News or Model Aviation, because, what else is there out there??
  Thanks in advance,
   Dan McEntee

[Joseph Daly]

Hey Dan,
I think it is April 22.
https://www.modelaviationdigital.com/modelaviation/library/item/april_2022/3997757/
Hope that helps
Joe

[Dan McEntee]

Hey Dan,
I think it is April 22.
https://www.modelaviationdigital.com/modelaviation/library/item/april_2022/3997757/
Hope that helps
Joe

    Thanks Joe. Got this suggestion from Dennis Nunes also. Just dug out that issue and will pass it on, but I think it's what he was talking about. I just couldn't think of where t o start to look, and He thought it may have been as mu8ch as a few years ago, but it didn't ring any bells with me. The biggest question was on what kind of lasers you used and how they are set up. This is for Mark Hughes. I'm gonna help him set up a jig for two new models he's working on. Gonna work  up something for myself also.
    Thanks again,
    Dan McEntee