stunthanger.com

General control line discussion => Open Forum => Topic started by: JHildreth on October 20, 2021, 08:34:18 PM

Title: Help IDing Mufflers
Post by: JHildreth on October 20, 2021, 08:34:18 PM

I need help identifying two tongue mufflers.  All three mufflers in the attached pictures fit LA 40/46 engines.  I need information on the mufflers on the left and right of the Double Star muffler.  The Double Star muffler is included to eliminate that one as a guess.
In particular, I need to know about the muffler on the left and where I can get another one.  Thanks for your help.

Joe

Title: Re: Help IDing Mufflers
Post by: Dan McEntee on October 20, 2021, 11:35:42 PM

  I think the one on the left is like the units that RSM sells. I don't know anout the one on the right with the bolt on end plate. That may be an Adamisin poece.
   Type at you later,
   Dan McEntee

Title: Re: Help IDing Mufflers
Post by: Perry Rose on October 21, 2021, 05:33:52 AM

 Yup an RSM unit.
I have a couple of Big Art's mufflers and they all have angled ends not rounded and flush fit end cap screws. Evolution mufflers have round ends but no end screws.Could be a home made piece. If it's 1.750" wide that is what it is.  Du-Bro 6" aluminum exhaust extension stock p/n 213.