Link 1
Stunt Hangar YouTube
P.A.M.P.A.
AMA
Balsa Density Calculator
This topic
This board
Entire forum
Google
Home
Help
Tags
Advertise
Login
Register
News:
June 02, 2024, 04:42:57 AM
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
stunthanger.com
»
General control line discussion
»
Open Forum
(Moderators:
RandySmith
,
Steve Berry
) »
Nobler coming along
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Nobler coming along (Read 1319 times)
Sam Laughery
ACE
Trade Count:
(
0
)
Commander
Posts: 322
Nobler coming along
«
on:
April 24, 2008, 06:26:27 PM »
I finally got back to working on my Nobler after a brief delay to take care of a few health probems and knocking a few items off of the 'new house' Honey do list. I won't have it done for Huntersville but hope to have it finished for the Brodak Flyin. I decided to plank the wings after reading some of the comments about weight not being a huge issue. My last Nobler was only 38 oz. The dif between cap strips and planking was less than an ounce. I'm using the rudder from a Nobler I built in about 1959. It's shown in the pic. I was going to use the entire tail section but some of the wood was brittle. Here are a couple of pics.
Sam
Logged
Paul Taylor
24 supporter
Trade Count:
(
0
)
Admiral
Posts: 6080
If God is your Co-pilot - swap seats!
Re: Nobler coming along
«
Reply #1 on:
April 24, 2008, 07:17:28 PM »
Looks good Sam!!!
I don't know a whole lot, but you might want to adjust the rudder just a tad.
Paul
Logged
Paul
AMA 842917
Tight Lines = Fun Times
Patrick Rowan
AMA Member
Trade Count:
(
0
)
Commander
Posts: 165
Re: Nobler coming along
«
Reply #2 on:
April 24, 2008, 09:07:08 PM »
Looking good Sam.
Hope to see it & you in june.
Logged
Fly Stunt
75750
Poland, Ohio
Leo Mehl
Trade Count:
(
0
)
Admiral
Posts: 1951
Re: Nobler coming along
«
Reply #3 on:
April 25, 2008, 04:50:03 PM »
Looking Good, I also have been known for using old rudders. This looks like the 52 Nobler,am I correct?
Logged
john e. holliday
24 supporter
Trade Count:
(
0
)
Admiral
Posts: 22784
Re: Nobler coming along
«
Reply #4 on:
April 26, 2008, 08:06:04 AM »
The "Nobler" is looking real good. Is the kit now laser cut? Also I never thought of sheeting the whole wing on a "Nobler". Should make finishing easier. I am waiting on my "Gieske Nobler" to get here. Have fun, DOC Holliday
Logged
John E. "DOC" Holliday
10421 West 56th Terrace
Shawnee, KANSAS 66203
AMA 23530 Have fun as I have and I am still breaking a record.
Sam Laughery
ACE
Trade Count:
(
0
)
Commander
Posts: 322
Re: Nobler coming along
«
Reply #5 on:
April 26, 2008, 07:37:55 PM »
Yep it's the 52 Nobler. The majority of the parts for this kit are now laser cut. Still a ton of blocks to carve. Good to hear from you Pat. See you in June.
Sam
Logged
Paul Allen
2014 Supporters
Trade Count:
(
0
)
Commander
Posts: 392
Re: Nobler coming along
«
Reply #6 on:
April 27, 2008, 12:35:58 AM »
Sam
Do not intend to steal your thread,I hope there is a photo attached
of my just finished Brodak Nobler kit,41.5 ozs with DS40.
What kit are you building? The laser cut items look good.
Paul Allen
Australia
Logged
Sam Laughery
ACE
Trade Count:
(
0
)
Commander
Posts: 322
Re: Nobler coming along
«
Reply #7 on:
April 27, 2008, 08:38:25 AM »
Hi Paul,
Looks great!. Mine is a Brodak kit also.
Sam
Logged
Paul Allen
2014 Supporters
Trade Count:
(
0
)
Commander
Posts: 392
Re: Nobler coming along
«
Reply #8 on:
April 27, 2008, 05:12:49 PM »
Sam,
How long have they been laser cut?
My kit was purchased in 1997,yes I'am a
slow builder.
Working upside down, downunder it take's
a little longer.
Paul.
Logged
Sam Laughery
ACE
Trade Count:
(
0
)
Commander
Posts: 322
Re: Nobler coming along
«
Reply #9 on:
April 27, 2008, 06:38:38 PM »
I switched this kit to mostly laser cut about a year ago when John ran out of nobler kits. He's doing that with all kits as they run out. I think the next one to be switched will be the Cardinal. I know they are currently out of stock. There are a couple of kits to come out when some new balsa comes in. Last time I was at Brodaks a couple of weeks ago the new balsa had not come in yet. The All American Senior will be the next kit to come out.
Sam
Logged
Advertise Here
Print
Pages: [
1
]
Go Up
« previous
next »
Tags:
stunthanger.com
»
General control line discussion
»
Open Forum
(Moderators:
RandySmith
,
Steve Berry
) »
Nobler coming along
Advertise Here