stunthanger.com

General control line discussion => Open Forum => Topic started by: Bill Gruby on October 22, 2007, 11:10:08 AM

Title: Got a handle on it.
Post by: Bill Gruby on October 22, 2007, 11:10:08 AM
 OK Guys;

   Didn't want to spend what the were asking for a new handle. I modified the first one I did and put it on the bias at 10 degrees, it works well for me at that angle. This is what I came up with, what do you think? Yes I'm claiming bragging rights. LOL It is Cherry, Walnut and Oak.

  "Billy G"  (PE**)
Title: Re: Got a handle on it.
Post by: Bill Little on October 22, 2007, 11:23:08 AM
Looks outstanding, G-Man.
Title: Re: Got a handle on it.
Post by: john e. holliday on October 22, 2007, 11:46:53 AM
Bill G.  the handle looks great.  Is this for the giant Ringmaster?  Have I missed the flight reports on it or are you still getting a mortgage for the dope??  Have fun,  DOC Holliday
Title: Re: Got a handle on it.
Post by: Paul Taylor on October 22, 2007, 11:48:17 AM
WOW !
Title: Re: Got a handle on it.
Post by: Andrew Borgogna on October 22, 2007, 12:22:25 PM
Mr. G
That is so over the top, man it is beautiful.  You taking orders?
Andy
Title: Re: Got a handle on it.
Post by: Bill Little on October 22, 2007, 12:23:11 PM
Quote from: john e. holliday on October 22, 2007, 11:46:53 AM
Bill G.  the handle looks great.  Is this for the giant Ringmaster?  Have I missed the flight reports on it or are you still getting a mortgage for the dope??  Have fun,  DOC Holliday

He's working with the Govt. on a grant to buy enough dope for the 1000............
Title: Re: Got a handle on it.
Post by: Keith Spriggs on October 22, 2007, 01:34:16 PM
Quote from: Bill Little on October 22, 2007, 12:23:11 PM
He's working with the Govt. on a grant to buy enough dope for the 1000............

Was that his plan to get a lot of dope "off the streets"?
Title: Re: Got a handle on it.
Post by: Bill Gruby on October 22, 2007, 02:32:58 PM
Quote from: Keith Spriggs on October 22, 2007, 01:34:16 PM
Was that his plan to get a lot of dope "off the streets"?


   HMMMMMMM ----- I would say they wasted our tax dollars, they missed a couple by the looks of it.  LL~  LL~

  "Billy G"  VD~ VD~ VD~


   I just noticed that --- When did I become an "Admiral" ?   ;D ;D
Title: Re: Got a handle on it.
Post by: Bill Little on October 22, 2007, 03:13:37 PM
Quote from: Bill Gruby on October 22, 2007, 02:32:58 PM
9snip)
  "Billy G"  VD~ VD~ VD~


   I just noticed that --- When did I become an "Admiral" ?   ;D ;D

IIRC, 900 is Admiral level.  Now, on this site I got you really whooped! LOL!! You'll have to outlive me by several years to catch up and bust me since I am already at over 4200....... LL~
Title: Re: Got a handle on it.
Post by: Shultzie on October 24, 2007, 01:37:41 PM
AMEN BROTHA "G MAN! THANKS!!!

Speaking of handles and the hand of the GOD OF NOB...check this out!
As far as the handle itself goes...I wonder how many models he lost (scary looking brass knobby thingeee' that looks OHHHHHSOOOOO precarious?
Title: Re: Got a handle on it.
Post by: Marvin Denny on October 24, 2007, 03:02:12 PM
  That appears to be a "Magnum" handle.  George Aldrich used to have something to do with them if I remember correctly.  The Combat guys really liked them as they were light with very little overhang.  Some of the users of those handles put balsa wood side pads on them to get a better feel to the hand grip.
  I still have a couple of them in the junk barrel.

  Bigiron
Title: Re: Got a handle on it.
Post by: Andrew Hathaway on October 24, 2007, 03:09:53 PM
I've got one of those 'Magnum' handles that was doctored with by cutting the back side flat, and sliding a bicycle handle bar grip over the center.  I used it so much that the sullivan line clips finally fell apart and the cable has a small fray.  I had to clean the safety thong a few years back cause it was too gross to handle. Eventually I'll throw a new cable in it and it'll be all set to use again.
Title: Re: Got a handle on it.
Post by: Marvin Denny on October 24, 2007, 03:19:27 PM
  Andrew, I have some of the 3/64ths inch cable that fits that handle.  A/C grade SS.

  Bigiron
Title: Re: Got a handle on it.
Post by: George on October 25, 2007, 11:15:20 AM
Quote from: Shultzie on October 24, 2007, 01:37:41 PM
AMEN BROTHA "G MAN! THANKS!!!

Speaking of handles and the hand of the GOD OF NOB...check this out!
As far as the handle itself goes...I wonder how many models he lost (scary looking brass knobby thingeee' that looks OHHHHHSOOOOO precarious?

If that is GMA's hand, the handle is upside down because he flew clockwise. George said he held handles upside down when flying someone else's CCW plane. Perhaps the locking nut goes on the bottom. Is either side marked "UP"?

George
Title: Re: Got a handle on it.
Post by: Marvin Denny on October 25, 2007, 11:28:07 AM
 Is either side marked "UP"?

George
[/quote]

  Mine are not marked with any up or other  identifier as to the up end, but the finger notches and the bias of the hand grip is such that the knob is on the top end.  so  probably you are correct in that  that is NOT GMA's hand.  I once heard that he designed that handle.  Thought just hit me--- Could it be that that really IS his hand and the lines are connected to the plane in reverse??

 Bigiron
Title: Re: Got a handle on it.
Post by: richardhfcl on October 25, 2007, 02:36:41 PM
The mystery hand is that of Michael Schmitt of the Chicagoland Circle Cutters.  The flight becomes a little more of a trick when you realize that Mike is
flying with his left hand and taking the picture with his right hand, not that easy for a lot of us right-handers.  Those Magnum handles are still seen out
at Ned Brown Forest Preserves, but are now being used mostly by sport and stunt fliers.

     Best regards,

     Dick Ferrell
Title: Re: Got a handle on it.
Post by: steve pagano on October 28, 2007, 06:31:25 AM
Sweet looking handle!! One that looks that good needs to be in a special case that you only open when you're already at the field gassed up and need to connect it to the lines n~ **)