Gieseke Nobler

[Larry Fernandez]

I posted a couple of months back that I will be building a Gieseke Nobler as a tribute to the Late Great Bob Gieseke.
Here she is, framed up with three coats of dope.
34.5 oz with motor, prop, spinner, muffler, tank and wheels.

I want to thank Elliot Scott and Jim Hoffman for their contributions to the project.

Larry, Buttafucco Stunt Team

[M Spencer]

IS THAT A TWIST IN THE WING THERE . 

Just Kidding . 

Looks Very Nice .

Been thinking if Goldberg was in Bob's neigbourhood , it wouldve been that Goldberg paint .

Should be a hum-dinger , being the usual standard . The ' gotta builda Gieske Nobler ' Grip
comes each time we see one . A nice one , anyway .

[Lyle Spiegel]

What engine are you using?

[Gordon Tarbell]

Guessing the use of an Aero tiger 36. He has around ten or twelve. Nice plane Larry . Hope to see it in the air soon.

[Gerald Arana]

AH-HA! So that's how you get your mono coat on there so smooth...........

Just kidding Larry, I want to see it fly when you get'er done!

Jerry

[James Holford]

Beautiful!!

Sent from my SAMSUNG-SM-G891A using Tapatalk

[Larry Fernandez]

What engine are you using?

As Gordon pointed out, its set up with an AeroTiger .36
should be a great matchup in a Nobler. They sure work great in my Thunderbird.

Larry, Buttafucco Stunt Team

[BYU]

I posted a couple of months back that I will be building a Gieseke Nobler as a tribute to the Late Great Bob Gieseke.
Here she is, framed up with three coats of dope.
34.5 oz with motor, prop, spinner, muffler, tank and wheels.

I want to thank Jim Hoffman for his contribution to the project.

Larry, Buttafucco Stunt Team

Looks awesome Larry

[Randy Cuberly]

As Gordon pointed out, its set up with an AeroTiger .36
should be a great matchup in a Nobler. They sure work great in my Thunderbird.

Larry, Buttafucco Stunt Team

MY last Gieseke Nobler had a AeroTiger in it and weighed 38 oz.  Great set up!  10.5-4.25 Phelps carbon prop!  I'll send you one of the Phelps Props, if you need it!

Randy Cuberly

[Larry Fernandez]

MY last Gieseke Nobler had a AeroTiger in it and weighed 38 oz.  Great set up!  10.5-4.25 Phelps carbon prop!  I'll send you one of the Phelps Props, if you need it!

Randy Cuberly

Can you post a picture of a Phelps prop?
I’ve been using the Mejlek(?) props on my AeroTigers but I’m always open to experiment

Larry, Buttafucco Stunt Team

[Randy Cuberly]

Can you post a picture of a Phelps prop?
I’ve been using the Mejlek(?) props on my AeroTigers but I’m always open to experiment

Larry, Buttafucco Stunt Team

Hmmmm...Well I can try!  Top one is finished a balanced...bottom is just out of mold still in flash!

This is considered THE Aero Tiger prop by a lot of folks "around here"...to include Me, Mr. RJ Whitely, and of course Mr. G. Phelps!

Not apparent from picture of course is prop has slight under camber!

Randy Cuberly

[Randy Cuberly]

Larry,
Attached is a picture of my last Gieseke Nobler at VSC several years ago.  That's also a Phelps Prop.

You'll notice, of course that i's not as nicely finished as yours will be but it was built and finished in just two weeks to replace another airplane that was lost!

Light and straight it flew very well. 

Randy Cuberly