stunthanger.com

General control line discussion => Open Forum => Topic started by: Bootlegger on September 23, 2009, 10:19:47 AM

Title: fuse finish...
Post by: Bootlegger on September 23, 2009, 10:19:47 AM

   Mornin' Guy's, I am tryin' a new to me finish on a profile fuse, I coated the fuse with an epoxy finishing glue.
 When I put the first, and only, coat on it I wiped the excess epoxy off with paper towels.
  Would ya'll suggest a second coat of epoxy, or start with the dope type finish?
  I am gonna use a clear finish to keep the weight down.
  Thanks for the suggestions,

Title: Re: fuse finish...
Post by: Bob Reeves on September 23, 2009, 05:23:44 PM

One coat is usually enough to seal the wood which is all you want the epoxy to do. Sand it and start your finish..

Title: Re: fuse finish...
Post by: Bootlegger on September 24, 2009, 05:14:10 AM

    Thanks Bob, I appreciate your help...