stunthanger.com

General control line discussion => Open Forum => Topic started by: Ara Dedekian on March 05, 2021, 02:32:28 PM

Title: Fox part numbers
Post by: Ara Dedekian on March 05, 2021, 02:32:28 PM

       Can anyone identify this piston and liner set? My Fox catalogs go back to the early 1970's and none of the part numbers matched the one on the package, #11605. My guess is a Fox 29.

       Ara

Title: Re: Fox part numbers
Post by: BillP on March 05, 2021, 03:21:22 PM

MECOA shows...
1992 Fox 15 BB.
Piston/liner/rod assy

Title: Re: Fox part numbers
Post by: C.T. Schaefer on March 06, 2021, 05:22:57 AM

Open the pack and measure bore

Title: Re: Fox part numbers
Post by: Steve_Pollock on March 06, 2021, 09:34:16 AM

BillP has it right -- it's a Schneurle .15 P&L.  The $24.00 price matches, too.

Title: Re: Fox part numbers
Post by: Ara Dedekian on March 06, 2021, 05:30:56 PM

      IT'S A TYPO!

         The package on the left, #11605, is a real Fox 15 piston & liner. The right package, #11605, looks unopened and is how it shipped from the factory. It was mislabeled as a .15 P&L and may actually be a Stunt 35 P&L. The bore measured about .799", allowing for the plastic. The bore and stroke of the stunt .35 is listed as .800" x .700".

         Ara