stunthanger.com

General control line discussion => Open Forum => Topic started by: GGeezer on July 24, 2018, 04:48:34 PM

Title: Fox Neddle Valve
Post by: GGeezer on July 24, 2018, 04:48:34 PM

Hi Folks,

Where can I get a Needle Valve for a 50th Anniversary Fox .35?
Thanks for your help.

Orv.

Title: Re: Fox Neddle Valve
Post by: Brett Buck on July 24, 2018, 05:28:07 PM

Quote from: GGeezer on July 24, 2018, 04:48:34 PM

Hi Folks,

Where can I get a Needle Valve for a 50th Anniversary Fox .35?
Thanks for your help.

Orv.

 MECOA has them.  I got a couple of them a few weeks ago. I am still trying to work out a method to regrind the taper, because they were ground off-center. I think I will cut off the "head", chuck it up in a drill press, then spin my Dremel tool with a grinding stone against it to straighten the taper, and then braze the head back on it.

      Brett

Title: Re: Fox Neddle Valve
Post by: Steve Helmick on July 24, 2018, 06:13:16 PM

If you want a (much) better NV ASSY., Randy Smith has one of his design that is made specifically to duplicate the Fox spraybar dimensions. You won't regret it!  H^^ Steve