stunthanger.com
General control line discussion => Open Forum => Topic started by: Mike Griffin on February 06, 2018, 09:06:26 AM
-
Eric Rule of RSM and I have received some requests from friends of ours who also fly RC fixed wing models regarding kits and we need some input from you all. I have posted the subject matter and questions in my GRIFFINS MODEL SERVICE in Vendors Corner because I do not want to take up space on the main forum since this is a CL stunt forum. Please click the link below and it will take you directly to the post. Thank you very much for your help.
https://stunthanger.com/smf/griffin's-model-service/possible-out-of-production-traditional-rc-kits-from-the-60s-and-70s/new/#new
MIke
-
Mike,
I know there's a bunch of guys interested in the pattern ships I used to fly back in the 80's and 90's.
They Post on RCU, probably a good place to get feedback on interest.
Thing is, most of these models had fiberglass fuselages and foam wings. Big at that time.
As for other R/C interest, it's all at RCU and other RC Forums.
Not a bad idea doing the old kits, but most guys fly ARF's.
Those CL guys interested in scale would likely be good candidates for the no longer made scale kits. A guess.
The Aristocraft kits were great. Don't know if you have to track down anyone to get the OK to make them?
I have two of the Grumman F3F Aristocraft kits. I have the plans someplace and I believe I have all the parts drawn as templates also.
Good luck.
CB
-
While not R/C, I would love to see some of the old Kyosho, Aristo-Craft, Eureka "scale"C/L kits reproduced. #^ #^