stunthanger.com

General control line discussion => Open Forum => Topic started by: Clint Ormosen on March 07, 2008, 10:24:34 AM

Title: Finally, the finished Vanloo Chipmunk
Post by: Clint Ormosen on March 07, 2008, 10:24:34 AM
.......and not a moment too soon. With the VSC only a few days away, I'll get the first and only test flights on it this Sunday, then off it goes to AZ. There is a tremendous amount of orange peel in the paint, but it's just going to have to stay that way untill after VSC. No time to sand and buff it out. I don't think the dope is cured enough for that anyway. Still, I'm happy with the way it came out. It represents my personal best effort to date. I've got a LOT to learn about finishing but I think this one's not too shabby. I hope it flies well!

Thanks to:
Walter Umland for producing this fine kit.
Gary Widmer for agreeing to sell it to me.

Special thanks to all the great guys here at StuntHanger that replied to my posts and helped with advice and encouragement.

The Chip is 585 sq in., Weighs 47.6 oz, and has a Brodak .40, and is finished in dope.
Title: Re: Finally, the finished Vanloo Chipmunk
Post by: Bill Little on March 07, 2008, 10:33:51 AM
Hi Clint,

It looks great from here! y1  Excellent job.
Title: Re: Finally, the finished Vanloo Chipmunk
Post by: Crist Rigotti on March 07, 2008, 10:57:56 AM
What, no pilot!  You musta been tallking to Sparky!   ;D

Nice looking Chip.  Good luck Sunday and at VSC.
Title: Re: Finally, the finished Vanloo Chipmunk
Post by: Clint Ormosen on March 07, 2008, 12:34:32 PM
What, no pilot!  You musta been tallking to Sparky!   ;D

Nice looking Chip.  Good luck Sunday and at VSC.

LOL! No, sorry. I usually prefer a finished cockpit without the pilot.
Title: Re: Finally, the finished Vanloo Chipmunk
Post by: Chris McMillin on March 07, 2008, 01:00:35 PM
Beautiful, Clint.
Looks neat and clean.
Good choice following the original scheme, makes it look like it is a model with real acro airplane heritage.
Enjoy the contest, I'll look forward to seeing you another time.
Chris...

Title: Re: Finally, the finished Vanloo Chipmunk
Post by: Steve Fitton on March 07, 2008, 02:55:15 PM
Wow! That looks awesome!  You must have been masking till your eyes popped out! n~
Title: Re: Finally, the finished Vanloo Chipmunk
Post by: Clint Ormosen on March 07, 2008, 03:24:11 PM
Wow! That looks awesome!  You must have been masking till your eyes popped out! n~

Nah. Jim Snelson cuts real nice vinyl paint masks, doesn't he?
Title: Re: Finally, the finished Vanloo Chipmunk
Post by: Paul Taylor on March 07, 2008, 04:26:35 PM
Looks great Clint !!!!

I'll take it.

Good luck at VSC. Run down my buddy Art Z. from Portland. Tell him that I wish he was here.


Paul  H^^
Title: Re: Finally, the finished Vanloo Chipmunk
Post by: Randy Powell on March 07, 2008, 04:41:03 PM
Clint,

Can't wait to see it in person in Tucson. We fly out Sunday! Arrive about 11am.

Looks fabulous.
Title: Re: Finally, the finished Vanloo Chipmunk
Post by: Dennis Adamisin on March 07, 2008, 05:50:50 PM
WAY TO GO CLINT!!!  H^^  CLP**  BW@  HH%%

You finished ON TIME, to competitive weight with good power - looks like a real winner!
Title: Re: Finally, the finished Vanloo Chipmunk
Post by: Peter Ferguson on March 07, 2008, 05:55:57 PM
Worth every penny!
Title: Re: Finally, the finished Vanloo Chipmunk
Post by: Clint Ormosen on March 09, 2008, 06:17:50 PM
 First flights with the Chipmunk today went good. First flight was a very short shakedown flight. Second flight flew the entire pattern (not real well) and engine quit within 5 laps after the pattern. It's nose heavy, but I'll worry about that stuff later. Didn't want to push my luck this close to VSC, and we were over blacktop!
 Pete Cunha with his Smoothie, and Tom Hagler with his Oriental, also put up some practice flights today and both are ready to go. Pete is driving out there with the planes while Tom and I are flying out on Wed. Should be a blast!
Title: Re: Finally, the finished Vanloo Chipmunk
Post by: Mike Bush on March 09, 2008, 10:21:45 PM
Clint.
Congratulations, I am glad everthing went well today. The big stuff is done, now the fun stuff begins.

Mike
Title: Re: Finally, the finished Vanloo Chipmunk
Post by: Clint Ormosen on March 10, 2008, 01:51:20 AM
Clint.
Congratulations, I am glad everthing went well today. The big stuff is done, now the fun stuff begins.

Mike

Holy Cow! Mike made a post! (PE**)

Thanks Mike, I'm looking forward to getting more flights on it this season.

Now, for my next model, I think I'll build................................................................................................
Title: Re: Finally, the finished Vanloo Chipmunk
Post by: Tom Hagler on March 10, 2008, 12:05:51 PM
Clint's too modest. The 'Munk looked great in the air, and his pattern wasn't too shabby for as much practice as we're all getting. VSC is indeed going to be a blast!

Mikey! Welcome back to stunt!

Hag
Title: Re: Finally, the finished Vanloo Chipmunk
Post by: frank carlisle on March 11, 2008, 10:34:58 AM
That's a spectacular model Clint.................. y1
Title: Re: Finally, the finished Vanloo Chipmunk
Post by: bruce malm on March 11, 2008, 10:54:10 AM
Clint,
I can't see it from here in Rescue. When you coming up again. Bring some friends. The field is getting better every week. I planted some more grass to start filling in better up towards the house. Good luck at VSC. Hope to attend in the next year or 2.
Bruce
Title: Re: Finally, the finished Vanloo Chipmunk
Post by: Harleyman on March 11, 2008, 07:53:57 PM
Very nice.   H^^
Title: Re: Finally, the finished Vanloo Chipmunk
Post by: john e. holliday on March 11, 2008, 09:16:14 PM
Clint anxious to see it in person.  I was out today(Tuesday) with the mutt and trying to get flights on the 13.  Hope it flies as well as it looks.  DOC Holliday
Title: Re: Finally, the finished Vanloo Chipmunk
Post by: Michael Boucher on March 12, 2008, 06:10:58 AM
Hi Clint,  Beautiful Chip Stunter.  I wish you much success with it. #^
Title: Re: Finally, the finished Vanloo Chipmunk
Post by: Derek Moran on March 12, 2008, 08:35:19 AM
Inspirational, Clint- I just received plans from Walter.  Thanks for the series of posts and best of success at VSC.
Derek
Title: Re: Finally, the finished Vanloo Chipmunk
Post by: Randy Ryan on March 13, 2008, 05:40:14 PM
LOL! No, sorry. I usually prefer a finished cockpit without the pilot.


I'm with you Clint, I hate pilot figures!!

The Chippy turned out really nice!!
Title: Re: Finally, the finished Vanloo Chipmunk
Post by: john e. holliday on March 14, 2008, 05:09:52 PM
The plane looks even better in person.  Didn't get to see it fly, but, the wind came up before my flight.  Chickened out with the Spitfire as there is a gravity hole on the east side of the #2 circle.  DOC Holliday
Title: Re: Finally, the finished Vanloo Chipmunk
Post by: Clint Ormosen on March 16, 2008, 05:38:58 PM
The plane looks even better in person.  Didn't get to see it fly, but, the wind came up before my flight.  Chickened out with the Spitfire as there is a gravity hole on the east side of the #2 circle.  DOC Holliday

 Day 1 of Classic put my flight is some pretty nasty wind gusts. I decided to go up anyway and nearly lost the model in the clover (inches from a total disaster!). The guys using more power than me had better luck in the wind. Day 2 put my flight in the morning with calm air, which gave me a golden opportunity for a good flight. But, for some reason the the plane kept getting loose in any outside turn. I found out later in the hotel room that the tip weight hatch had dissapeared along with all the weights inside! After Fridays flights I had taken the time to tighten every bolt on the model, but I seem to have forgotten that one. Oh well.
 Oh, and the tail wheel wire broke off inside the fuse some time during Friday morning practice. Mike Haverly was kind enough to let me use his mobile hobby shop to make a tail skid out of a busted prop that Ty gave me.
 Good news is that the Chip is still in one piece and shows promise!
Title: Re: Finally, the finished Vanloo Chipmunk
Post by: john e. holliday on March 17, 2008, 08:40:37 AM
Hi Clint, it was great meeting you and your group and letting me share the table at the banquet.  Especially Tony Drago, as he is one I used to read alot about.  In my pit box I have a weight box with part of a rib and covering I found down at the practice circle.  It is blue paint on the lid.  I also have a small tail wheel found at circle two when I was getting ready for a flight.  Glad your plane is intack,  DOC Holliday
Title: Re: Finally, the finished Vanloo Chipmunk
Post by: Clint Ormosen on March 17, 2008, 08:50:18 AM
Doc, the hatch cover I'm missing is red and I have the tail wheel.

I guess someone else is missing stuff off their planes too. LL~