Fillets over Monokote

[Steve Agrella]

I just finished my SI,  I used Monokote now how to make fillets over Monokote,  any takers, much appreciate any answers

Steve

[Crist Rigotti]

I do it all the time.  No problem with Aeropoxy Lite.

[Paul Taylor]

And if you put monokote over the fuse, you can put monokote over the fillits. Use modeling clay rolled up along the edge and with a trim iron you can lay monokote down without it pulling up on the edges.
Louis Rankin showed me how to do it. Works nice and you can't even see the seam.

I think I have posted a few photos of Louis's planes here some place.

[Steve Agrella]

The fuse is paint, the wing is monokote

[Crist Rigotti]

The fuse is paint, the wing is monokote

Yes, that how I build most of my stunters.

[Paul Taylor]

If the fuse it painted, just mask off about 1/2 on the monokote and take a scuff pad and get the shine off the kote, then paint the fillits.

Here is a not so good photo of monokote fillits.