stunthanger.com

General control line discussion => Open Forum => Topic started by: Dwayne on April 10, 2007, 04:36:39 PM

Title: Fancy Pants update
Post by: Dwayne on April 10, 2007, 04:36:39 PM

Here's  the wing fuse and stab mocked up, so far it's going together fairly easy and should be ready for covering next week.
Thanks
Dwayne

Title: Re: Fancy Pants update
Post by: john e. holliday on April 10, 2007, 04:43:15 PM

Looking good.  DOC Holliday

Title: Re: Fancy Pants update
Post by: frank carlisle on April 10, 2007, 06:44:50 PM

My buddy Jan built a Fancy Pants Dwayne. It flew right off the board. It looks like you're doing a good job of building so I'll bet yours will be a good flyer too. Keep it up.

Title: Re: Fancy Pants update
Post by: Rob Killick on April 10, 2007, 08:55:22 PM

Hi Dwayne ,

One question ...

Have you attached the flaps to the wing ?
I can't see them in the photo .
If not , how will you get them into the fuselage/wing opening ?

Thanks ,

Rob K.

Title: Re: Fancy Pants update
Post by: Bill Little on April 11, 2007, 07:26:43 AM

Hi Dwayne,

Looking good so far!  H^^

I think you will enjoy the Fancy Pants.  It is an "honest" plane.

Bill <><

Title: Re: Fancy Pants update
Post by: Dwayne on April 11, 2007, 03:44:49 PM

Quote from: Rob Killick on April 10, 2007, 08:55:22 PM

Hi Dwayne ,

One question ...

Have you attached the flaps to the wing ?
I can't see them in the photo .
If not , how will you get them into the fuselage/wing opening ?

Thanks ,

Rob K.

Hi Rob thanks for the question
When building a full fuse plane the flaps and elevators are installed last after the model has been coverd.
Thanks
Dwayne

Title: Re: Fancy Pants update
Post by: jordan miller on April 16, 2007, 06:19:39 PM

Great flying plane!!! takes on the wind just like the box says. I used a Fox 35 on mine and gladly she is still flying today!!