stunthanger.com

General control line discussion => Open Forum => Topic started by: Larry Renger on December 22, 2016, 08:42:47 PM

Title: Exponential handle 2nd run
Post by: Larry Renger on December 22, 2016, 08:42:47 PM

Yup, back in stock. But going fast. 7 left.  ;D

I would need an expression of serious interest before ordering more links. They are the most expensive and hard to get parts.

We'll see how the current purchasers like them.  H^^

Title: Re: Exponential handle 2nd run
Post by: john e. holliday on December 22, 2016, 09:16:33 PM

Even though the temps are now above freezing the old body still says its too cold.  Besides that I was working on the projects this evening.  You would swear I have forgotten how to make a fuel tank and no I'm not going electric.

Title: Re: Exponential handle 2nd run
Post by: Larry Renger on December 28, 2016, 09:31:28 PM

Down to 5, get 'em while they are available.  #^

I will have to hear some serious demand for a new run of parts before I'll sink the funds into a new batch of kits! The links are expensive in the quantities we are likely to need.

It has been gratifying that the risk taken to do this first run paid off. I was glad to do it, as it seems to be a technology that can benefit all.

I eagerly await flight reports from the flyers who were interested enough to give this concept a try.   H^^

Title: Re: Exponential handle 2nd run
Post by: Larry Fruits on December 29, 2016, 10:48:25 AM

Hi Larry;
 
 P.M. sent.

 Thanks;
    Larry Fruits

Title: Re: Exponential handle 2nd run
Post by: Larry Renger on December 30, 2016, 01:07:30 PM

Only one kit left!   ;D

I have shipped kits to:

Doc Holliday, Frank Williams, Classix (?), Ray Copeland, G Van Tighen, Gerry Arana, Steve White, John Paris, Mark McRiley, David Beasley, Robert Storick, Richard Huff, Tim Redelman, Dale Gleason, Terry Caron, Tom Creasey

David Moritz kit is ready to ship. today.  I have one each reserved for Larry Fruits, John Craig and Joe Brownlee.

If I do another batch it will take a couple of months to get the metal parts. I would need a bunch of firm expressions of interest before that is going to get ordered.  H^^

Title: Re: Exponential handle 2nd run
Post by: Larry Renger on December 31, 2016, 09:32:09 AM

The last one has just been spoken for. Thanks for your interest in the project! No more orders at present, please, as I will just have to return the money with Paypal still taking a cut.  mw~ HB~>

If you want one, let me know, and if there is enough call, another batch of parts can be ordered.

Title: Re: Exponential handle 2nd run
Post by: Terry Caron on December 31, 2016, 11:04:08 AM

I received mine almost immediately and it looks great, Larry - thanks for making them available!

Title: Re: Exponential handle 2nd run
Post by: Larry Renger on December 31, 2016, 03:46:15 PM

Build, fly, report!  #^

Title: Re: Exponential handle 2nd run
Post by: Terry Caron on December 31, 2016, 04:16:51 PM

Will do - first thing - in warm weather.  ;D

Title: Re: Exponential handle 2nd run
Post by: Larry Renger on January 03, 2017, 01:46:59 PM

I find I have one kit left! Get it while it's hot.   y1