stunthanger.com
General control line discussion => Open Forum => Topic started by: Bootlegger on December 05, 2014, 08:23:50 AM
-
Guy's I am looking for some venturi "O" rings for the Evo 60 engine.
They are fairly thin approx 1/16" thick, so any help/suggestions will be appreciated..
-
Hi, Gil, I get my small O rings from Jim Lee; he has 8 mm and 10 mm diameter ones that are really "thin", have
never found any around here as good as Jim's!
-
Hi Gil,
McMaster-Carr is where I get O-Rings but thier website seems to be down right now...not sure why.
Grainger is another likely supplier. Order o-ring by I.D. and cross section...you want ideally a few thousanths smaller than the venturi barrel that it fits on...they will in fact stretch about 10% with no deleterious effect!
Ace Hardware also sells small kits with an assortment of o-rings and you could probably find what you need in the kit but of course you then have about 50 other o-rings to find a home for... ??? ::)
Randy Cuberly
-
Horizon Hobby will carry them for that engine also.
-
Got my O rings for Jim's fuel injector at the local O'Reilly's auto parts.