stunthanger.com

General control line discussion => Open Forum => Topic started by: James Holford on October 14, 2017, 10:10:40 PM

Title: Enya .19 V prop size
Post by: James Holford on October 14, 2017, 10:10:40 PM
What would be the most efficient prop for the Enya .19V 4005 for stunt?

Sent from my SAMSUNG-SM-G891A using Tapatalk

Title: Re: Enya .19 V prop size
Post by: Steve Lotz on October 15, 2017, 05:27:47 AM
A lot of variables here but I would start off with a 9X4.

Steve
Title: Re: Enya .19 V prop size
Post by: James Holford on October 15, 2017, 05:29:01 AM
A lot of variables here but I would start off with a 9X4.

Steve
Yea figured it would come with tuning but wasnt sure where to start.

Have a rev up in 9/4... might be the ticket! But will start witg a 9/4 apc to get the trimming done then play with props.

Sent from my SAMSUNG-SM-G891A using Tapatalk
Title: Re: Enya .19 V prop size
Post by: Akihiro Danjo on October 15, 2017, 07:59:10 AM
At that time, many Japanese flyers used wood (TF, Rev-up, Super Thrust, etc) 9x5 or 9x6, or TF nylon 9x6 for Enya19.
I will start with 9x5 now.
Aki