stunthanger.com

General control line discussion => Open Forum => Topic started by: John Watson on September 24, 2017, 04:28:02 PM

Title: Engine mounting templates.
Post by: John Watson on September 24, 2017, 04:28:02 PM

Where can I find engine mounting templates for various engines?

Title: Re: Engine mounting templates.
Post by: Dennis Toth on September 24, 2017, 05:00:41 PM

John,
Check in Jim Lee's store down in the vendor area. Jim has jigs for most popular stunt engines.

Best,    DennisT

Title: Re: Engine mounting templates.
Post by: Mike Griffin on September 24, 2017, 05:59:03 PM

I have a set I bought from Eric Rule at RSM a few years ago.  I don't know if he still has them or not but you can try.

Mike

Title: Re: Engine mounting templates.
Post by: Curt D Contrata on September 24, 2017, 06:17:33 PM

What is really needed is a 3d printed version of the motor we are building our models for.
Been wishing for that for years, now it is possible yet none exist as far as I know.
Carving cowls, etc.

Hint, hint...

Curt