stunthanger.com

General control line discussion => Open Forum => Topic started by: Bootlegger on May 22, 2008, 03:52:53 PM

Title: ...engine...
Post by: Bootlegger on May 22, 2008, 03:52:53 PM

  Guy's Please tell me I'm not CRAZY...  I thought that I had read a post about the Evo 36 here on Stunt hanger.
   I sure would like to find and re read those posts... :!
 

Title: Re: ...engine...
Post by: Alan Hahn on May 22, 2008, 04:03:00 PM

Maybe it was over on SSW. I am sure they did have a big post on it, but I thought there was one here too. I did a search both in this topic and in the Engine forum and didn't see what I recall reading either. Not too sure where else to look on this site.

oops, ignore this response and look at the following post. Not too sure why the search didn't seem to turn up the link.

Title: Did you try uing the search function
Post by: Elwyn Aud on May 22, 2008, 04:04:17 PM

http://stunthanger.com/smf/index.php?topic=8797.0

Title: Re: ...engine...
Post by: Bootlegger on May 22, 2008, 06:18:03 PM

  Hoo wee, you guy's came through again...  Thanks again.

Title: Re: ...engine...
Post by: Steve Helmick on May 22, 2008, 08:13:58 PM

Here's one for ya. Is this the one you want? I sent the pic to Donaldo de GigHabba this week, so he may have already posted it in another forum. I have no idea what the fuel source is, but it's real. Try Googling for "Nano Engine".  y1 Steve

Title: Re: ...engine...
Post by: Jim Oliver on May 22, 2008, 09:26:40 PM

Steve,
What prop is best for this one??? ???

Jim

Title: Re: ...engine...
Post by: Lane Puckett on May 22, 2008, 09:46:39 PM

Props?

Go to your window sill and collect a couple of expired flys.  Then hot stuff the wings on.  Three bladed or four .... your choice.

Title: Re: ...engine...
Post by: Andrew Borgogna on May 22, 2008, 10:22:34 PM

Just so you know Gil the Evo .36's are on backorder until sometime in June.  I am still waiting for mine.  I have a Brodak Oriental that will be the proud host for said engine.
Andy

Title: Re: ...engine...
Post by: Bootlegger on May 23, 2008, 05:09:32 AM

 n~  Andy, I think that the Oriental will be a good model for that engine.
  I saw that it will be the end of June, so I'll have to wait also.
  I am "scratch" building a profile for mine, and am looking forward to it coming in.
  Thanks to Pete Bergstrom for his getting this engine for us control liners... :!

Title: Re: ...engine...
Post by: john e. holliday on May 23, 2008, 08:02:35 AM

With the impatience I have I made it thru May you might say.  Now can I make it thru June.  DOC Holliday