Ok.... so now I feel a little guilty..... but whats done is done..
This is no april fools day prank, this is a real conversation :
model #270947986361
Sent Date: Apr-06-12 20:49:44 PDT
Dear ytfordturkey,
Hello Im interested in this horn.
Could you please let me know the dimensions, and thickness - as well as what thread the screws are holding it down.
Do you know the history of this horn?
- pjr
Plastic horn for elevator on control line model
Plastic horn for elevator on control line model
Item Id: 270947986361
End time: 09-Apr-12 03:43:35 AEST
Seller:
ytfordturkey (744)
100.0% Positive Feedback
Hello OJ;
My dad was into Control Line flying, and purchased this in the early 1980's. He's passed away now, and all the rest of his models have gone on to a collector that has an entire house full of control line, free flight, or RC models! There's a bit of yellow coloring (Dope as it used to be called) on it from when Dad used in on a model he flew at the time. Dad drilled a hole in it for the control rod, but never touched the ones put in by the manufacturer. The base measures .5in. x .4 in. x .1 in. and the bottom plate is .05in. thick. The screws are 4/40 and come with nuts. There are two of them, in opposite corners (what you see in the photo is what you get). The height from base to tip of horn is 1.25 in. (not measuring base plate). The thickness of the horn is .7 in. Other than the screws and nuts, it's all plastic (nylon I think) and still pliable after all these years! Thank you for your interest.
Mike
- ytfordturkey
Click "respond" to reply through Messages, or go to your email to reply
Respond
Topic: Ebay treasure! (Read 4194 times)