stunthanger.com

General control line discussion => Open Forum => Topic started by: Steve Thornton on August 03, 2014, 03:21:52 PM

Title: Downdraft dust collector
Post by: Steve Thornton on August 03, 2014, 03:21:52 PM

Waiting for my hinges to dry and saw this on YouTube. It gave me some ideas for a good dust collector.  What do you folks think?  Maybe a reinforced pegboard top?
Steve

https://www.youtube.com/watch?v=cS-4X0AyebM

Title: Re: Downdraft dust collector
Post by: Larry Fruits on August 03, 2014, 04:11:26 PM

Steve,
 Thanks for sharing a really neat idea. Simple set up and looks like it would work well with the peg board top.

 Larry

Title: Re: Downdraft dust collector
Post by: Dane Martin on August 03, 2014, 04:15:43 PM

i run my jigsaw and router tables outside also! this would be super cool!!

Title: Re: Downdraft dust collector
Post by: Robert Zambelli on August 04, 2014, 03:21:28 PM

I built this combination work bench and downdraft dust collector around 5 years ago and it performs very well and keeps my shop dust free. I paint on it too.

It's very easy to build and can be tailored to your needs and size requirements.

It has a removeable hinged work surface, pegboard on one side and storage underneath.

I did a feature article in Control Line World and if anyone is interested, I can send them a copy.

Bob Z.

Title: Re: Downdraft dust collector
Post by: Crist Rigotti on August 04, 2014, 07:37:32 PM

Quote from: Robert Zambelli on August 04, 2014, 03:21:28 PM

I built this combination work bench and downdraft dust collector around 5 years ago and it performs very well and keeps my shop dust free. I paint on it too.

It's very easy to build and can be tailored to your needs and size requirements.

It has a removeable hinged work surface, pegboard on one side and storage underneath.

I did a feature article in Control Line World and if anyone is interested, I can send them a copy.

Bob Z.

Very cool Bob.  Please check you PM.

Title: Re: Downdraft dust collector
Post by: wwwarbird on August 04, 2014, 08:40:32 PM

Quote from: Robert Zambelli on August 04, 2014, 03:21:28 PM

I built this combination work bench and downdraft dust collector around 5 years ago and it performs very well and keeps my shop dust free. I paint on it too.

It's very easy to build and can be tailored to your needs and size requirements.

It has a removeable hinged work surface, pegboard on one side and storage underneath.

I did a feature article in Control Line World and if anyone is interested, I can send them a copy.

Bob Z.

 I remember that article, I really should build one. y1

Title: Re: Downdraft dust collector
Post by: Larry Fruits on August 05, 2014, 11:30:20 PM

Hi Bob,
 Really slick table.

 Sent you a PM.

 Thanks;
    Larry

Title: Re: Downdraft dust collector
Post by: Robert Zambelli on August 06, 2014, 05:36:04 AM

Crist and Larry.
I sent you PDFs of the bench article.
Please lt me know if they arrived in good order.

Bob Z.

Title: Re: Downdraft dust collector
Post by: Larry Fruits on August 06, 2014, 08:15:24 AM

Hi Bob,
 The PDF's you sent me are great. Thanks a bunch.
 Now I have to get busy and build one.

 Thanks again;
         Larry

Title: Re: Downdraft dust collector
Post by: Steve Thornton on August 06, 2014, 11:04:55 PM

Bob that's very nice work!  I would like to have a copy of the pdf as well.  Sending a PM. 
 Thanks,
 Steve Thornton

Title: Re: Downdraft dust collector
Post by: Robert Zambelli on August 07, 2014, 02:34:16 PM

Steve and Wes:  I sent the PDFs today.

  Bob Z.