stunthanger.com
General control line discussion => Open Forum => Topic started by: RC Storick on September 14, 2019, 09:43:06 PM
-
I am looking to order some bearings from Boca for St V.60 If you have the link or Boca's part number please let me know
-
hereis his list for super tigre
https://www.bocabearings.com/products/bearing-applications/rc-engine-bearings?ItemMakes=SUPER_TIGRE&ProductType=2
-
Go the way that motorman suggest in buying them
I do it the exact same way and I have NEVER had a wrong bearing delivered.
I use the bearings with the polymite plastic cages and I also get the front bearings with the rubber seals and just pop one off and place the remaining
sealed side towards the prop.
Also, if you have a motor that they do not have listed and new to them then they will USUALLY give you a discount on future orders.
Carl
-
I can't find my Boca catalog...... or I'd give you the number.
Next best thing is to remove the bearings and ask for a set in kind.
Good luck, Jerry
-
I have them in stock !
Randy
-
Robert,
Was doing a search for the ST 60 bearings and came across the following - Boca Bearing has them listed as ST (OLD) 60.
The front is the same as ST46. It's a 607 which is 7mm ID, 19mm OD & 6mm wide.
The rear is a 16002 which is 15mm ID, 32mm OD & 8mm wide
Best, DennisT
-
I am looking to order some bearings from Boca for St V.60 If you have the link or Boca's part number please let me know
I have them in stock
Randy 678 407 9376