stunthanger.com
General control line discussion => Open Forum => Topic started by: Scott Richlen on March 20, 2017, 08:20:02 PM
-
I coulda sworn I heard somebody say they wanted to see my Goldfish. Inklines are still drying!
Purpose-built for saber-dancing (and maybe winning the Walker Cup in its spare time) ;D
Fox 35, of course (and now I suppose that you'll all remind me of all the derogatory things I've posted about that noble engine... S?P)
-
Walker Cup aside, it should be fun to fly just for the halibut... VD~
-
We need you to bring this to SMALL.
-
Is that a modified Flounder?
-
WOW! What engine? What's the finspan"
-
I coulda sworn I heard somebody say they wanted to see my Goldfish. Inklines are still drying!
Purpose-built for saber-dancing (and maybe winning the Walker Cup in its spare time) ;D
Fox 35, of course (and now I suppose that you'll all remind me of all the derogatory things I've posted about that noble engine... S?P)
Scott,
You do nice work! Here's some documentation for you if you want to enter a "Scales" event!
Don
-
Very cool,nicely done!
-
"All that glitters is not goldfish". (a quote from "Fractured Fairy Tales".)
-
Holy Cow! Youse guys is worser sense of humor than me!
DeHill gets extra fish-points as he spotted the obvious blood-lines. Most people don't realize how closely Goldfish are related to Flounder (at least the Flying Flounder). This is a Flying Flounder what grewd a body with nose and tail and fins.
Finspan is about 18 or 19 inches.
An exercise in ink-lining to be sure.
-
Flounder
-
Walt Williamson would be proud.
-
Scott-
I LOVE it!! Great job, done with style. I think it will out-fly the Flounder too. 'made my day!
SK
Edit: 'will definitely out-fly the "Flounder."
-
Fodiator? look it up. LL~
-
Very nice! Especially the ink lines. What scale did you use?
-
Just wondering? What is the how-to of ink lines? ???
-
I coulda sworn I heard somebody say they wanted to see my Goldfish. Inklines are still drying!
Purpose-built for saber-dancing (and maybe winning the Walker Cup in its spare time) ;D
Fox 35, of course (and now I suppose that you'll all remind me of all the derogatory things I've posted about that noble engine... S?P)
THAT would be a fun plane to fly for laughs and giggles. Do you have any kind of plans, rough draft? Sketch?
Thanks,
George
-
Bruce Perry needs to
grow build one. VD~ Steve
-
So, it's a Fodiator not a Goldfish? Ummm, unless you look it up, Fodiator leads to all kinds of surmises as to what I was doing in building it...
On the ink lining and the plans, in all of my spare time, I plan on writing an article on ink-lining and one on the (now I don't know WHAT to call it!!) for Bob Hunt so he's got something to print in Stunt News.
-
Are going to use Spectra fishing line for this?
-
I would but the hooks keep getting caught in my finger when I try to attach them.....
-
Beautiful workmanship, Scott, and without doubt the most imaginative creation I've seen in modelling.
Outstanding job.
-
ABCM Goldfish?
LMNO Goldfish!
OSAR Goldfish!
CMSWMN!
K
-
Okay Keith, I guess I'm slow this morning, but you completely lost me on your last post. ???
-
ABCM= Abby see my gold fish?
The rest follows easily. That is if your a child of he 50's
Joe
-
Leave My Name Off Goldfish?
-
('el)L, ('e)M (ai)N('t) (n)O Goldfish!
-
Something is fishy about this plane.....lol
Great ....Cool.....Plane!!!!!!
-
Great job with the gold! Trust you have the matching gold Fox 35?
(There's one on EBay right now if you want one to match)
G
-
ABCM Goldfish?
LMNO Goldfish!
OSAR Goldfish!
CMSWM
I haven't seen that one in a long time, but now I see 'em swimmin'.
-
Okay! I get it!
LSMFT Goldfish
Uhhh, wait. Maybe I don't get it...
-
Not cracking the code here. ???
-
Hey Scott,
Did the Goldfish ever fly?
-
Hey Scott,
Did the Goldfish ever fly?
Well, sorta. The first flight I had the tail too tall (the fin on the bottom of the fuselage was as tall as the one on top) so all it did was go round and round the circle. All the guys in our club came out to see the "big event" and when it wouldn't take off but did its Land Shark imitation they were all laughing hysterically. In fact I was afraid someone might bust a gut or something they were laughing so hard. They even drowned out the noise of the Fox engine!
So, I had to take it home and trim the bottom fin so it could get enough angle of attack to be able to take off. The bad part was that when it got into the air it would have to land again. I found out with that much drag it doesn't glide. At all.
So, when it would land it would crash and ended up bending the gear so much they tore the paper. So then I had to repair it.
And then the next time I took it out it would fire right up, we would launch it and it would just start to climb and the engine would die. So after a couple of crashes from maybe 5 or 6 feet right off the end of the runway, I decided I had a tank problem.
So, now it's hanging "on the pipe" in my basement wondering "where's the love?" :'(
-
Wing needs more area , you need to work out the minimum area to lift the weight/size.
I wouldnt try flying ANYTHING with less than 150sq" and thats really pushing the friendship.
-
Wing needs more area
Nope. Wing needs less frontal area - meaning drag.
Just like the Flying Flounder. from whom it is descended (yes, really bad pun). once the engine quits it stops flying. And I mean "NOW!" ;D
-
Nope to all the above!!!
The Devil is in the aspect ratio! What are the odds of ever seeing a sail plane with that sort of stubby .5 to one AR. ZEROOOOOW! (the ending W is for the wedge shaped hole it leaves in the Autumn leafs after touchdown following the -30 degree glide slope descent!)
Other than that it's a giant step forward in the CLPA History Book!
Ted
p.s. Grrrrreat fun, Scott. Thanks for sharing!
-
Not quite Walker Cup material is it?
-
Had to dig this one out.... 10 in wide and 17 in long.... 3 in thick Cox Golden Bee. Built this 30 - 40 years ago..... Quick control inputs would cause a rolling motion.... With luck a snap roll was possible.... I don't even think there was alcohol involved.... Maybe I shoulda n~ n~ n~ n~ n~ n~
Jim
-
Sorry..
Your building like a dancing plane. I see very impressive!
Ive seen a few with throttle that work nice.
-
Very cool,would love to see it fly! Great job!