stunthanger.com

General control line discussion => Open Forum => Topic started by: Bootlegger on April 13, 2007, 07:21:52 AM

Title: ... dia and length...
Post by: Bootlegger on April 13, 2007, 07:21:52 AM: Mornin' from South Louisiana,
Guy's I am lookin' for some suggestions for line length and dia on a model of about 200 sq in powered by as OS .099 pet that a friend in the frozen Nawth sent to me (Thanks again Bill ) !!!
Any suggestions will be 'ppreciated...... H^^
Title: Re: ... dia and length...
Post by: Bill Little on April 13, 2007, 07:27:23 AM: Quote from: Bootlegger on April 13, 2007, 07:21:52 AM
Mornin' from South Louisiana,
Guy's I am lookin' for some suggestions for line length and dia on a model of about 200 sq in powered by as OS .099 pet that a friend in the frozen Nawth sent to me (Thanks again Bill ) !!!
Any suggestions will be 'ppreciated...... H^^

.012 X 42'
Title: Re: ... dia and length...
Post by: Bootlegger on April 13, 2007, 08:19:02 AM: S?P VD~ Z@@ZZZ Bill, You are ALRIGHT, I don't care what they say...!!
And thanks for the help...... D>K
Title: Re: ... dia and length...
Post by: Clint Ormosen on April 13, 2007, 04:34:10 PM: I'd say .012 X 41'. ;D
Title: Re: ... dia and length...
Post by: Bill Gruby on April 13, 2007, 05:16:27 PM: Bootlegger;

VD~ LL~ .012 X 42' LL~ VD~

"Billy G" VD~ VD~ VD~ S?P
Title: Re: ... dia and length...
Post by: Bill Little on April 14, 2007, 07:53:18 PM: Quote from: Bill Gruby on April 14, 2007, 05:44:25 PM
Bootlegger;

If those are uncomfortable try---------- .012 in. X 504 in. They will work. LL~ LL~ LL~ LL~ LL~ LL~

" Billy G " VD~ VD~ VD~ VD~ VD~ VD~

Yeah, G-Man, go making it complicated for us "Southern Boys"! Our rulers don't have that many inches on them.................

Billy Boy LL~ LL~ VD~
Title: Re: ... dia and length...
Post by: Bill Gruby on April 14, 2007, 09:49:27 PM: Sorry "Billy Boy"

Took Off THE Wrong One Here They Are Again:

Bootlegger Try These:

VD~ VD~ VD~ .012 in X 504 in VD~ VD~ VD~

VD~ VD~ VD~ .31mm X 12,801.6mm VD~ VD~ VD~

"Billy G"
Title: Re: ... dia and length...
Post by: George on April 18, 2007, 09:45:17 AM: Bootlegger,

If you're open to suggestions for something to hold that Pet to those .012's, I would humbly suggest a Wee Duper Zilch. Of course an Akromaster or Flite Streak Jr. would work too...

George
Title: Re: ... dia and length...
Post by: Bill Little on April 18, 2007, 09:40:06 PM: Quote from: George Bain on April 18, 2007, 09:45:17 AM
Bootlegger,

If you're open to suggestions for something to hold that Pet to those .012's, I would humbly suggest a Wee Duper Zilch. Of course an Akromaster or Flite Streak Jr. would work too...

George

Hi George,

When I get to hang up the whistles and clip boards, I will definitiely build my Wee Duper Zilch! I have a couple of pretty little OS 10S engines to pick from. They look like *models* of the OS 35S! Even run a 4-2! **)

Bill <><
Title: Re: ... dia and length...
Post by: George on April 20, 2007, 09:53:32 AM: Since many probably have not seen either engine, here is a pic. Lower right is Max .10, rest are late version Pet .09's:

George
Title: Re: ... dia and length...
Post by: Bill Gruby on April 20, 2007, 10:02:40 AM: George;

The upper two I have seen many times, I own a couple. But what is all that extra stuff on the venturi of the lower two? I don't recognise any of it. LL~ LL~ LL~ LL~ LL~ LL~ LL~ LL~ LL~

"Billy G" VD~ VD~
Title: Re: ... dia and length...
Post by: Bill Little on April 20, 2007, 10:53:15 AM: Quote from: Bill Gruby on April 20, 2007, 10:02:40 AM
George;

The upper two I have seen many times, I own a couple. But what is all that extra stuff on the venturi of the lower two? I don't recognise any of it. LL~ LL~ LL~ LL~ LL~ LL~ LL~ LL~ LL~

"Billy G" VD~ VD~

That's just "stuff" that you replace if you use the engine for Stunt!

**)
Title: Re: ... dia and length...
Post by: George on April 21, 2007, 07:51:25 AM: Quote from: Bill Little on April 20, 2007, 10:53:15 AM
That's just "stuff" that you replace if you use the engine for Stunt!

Actually, to convert the Pet to CL, you just remove the spraybar, which holds the carb in place, remove the carb , and replace the spraybar...no venturi insert. ;D

To replace the carb do just the opposite...but who'd do that!

BTW, one of the upper engines in the pic originally had one o' them carb thingies.

George
Title: Re: ... dia and length...
Post by: Bill Gruby on April 21, 2007, 08:01:43 AM: I hate to keep this goin, but this is just to easy. Whats a carb thingy for? Oh thats one of them R/C thingys. Never saw one. LL~ LL~ LL~ LL~

"Billy G" VD~ VD~ VD~

Thats it for me I can't keep a straight face and type too. I'm lettin this one go. ;D ;D ;D
Title: Re: ... dia and length...
Post by: Leo Mehl on April 27, 2007, 01:03:13 AM: Hey Billy I didn't know you had a strait face. Just kidding as usual! HH%% HH%% HH%% HH%% HH%% HH%% HH%% HH%% HH%% HH%% HH%% HH%% HH%% HH%% HH%%