stunthanger.com

General control line discussion => Open Forum => Topic started by: john ohnimus on January 26, 2020, 07:27:47 PM

Title: Derek Moran Line Clip Bender
Post by: john ohnimus on January 26, 2020, 07:27:47 PM

I was wondering if anyone has a copy of the drawings for Mr. Moran's Line Clip bender.?

Thanks,
 

Title: Re: Derek Moran Line Clip Bender
Post by: Brent Williams on January 26, 2020, 07:56:36 PM

https://stunthanger.com/smf/open-forum/source-for-line-clip-sets/msg484389/#msg484389

Title: Re: Derek Moran Line Clip Bender
Post by: Bootlegger on January 27, 2020, 07:35:04 AM

  Jim Lee sells them, I'm sure you can find him in the Vendors corner here on stunt hanger

Title: Re: Derek Moran Line Clip Bender
Post by: john e. holliday on January 27, 2020, 09:57:38 AM

Get the wire from him also. D>K

Title: Re: Derek Moran Line Clip Bender
Post by: Dave Harmon on January 27, 2020, 06:46:15 PM

The clip bender from Jim Lee works great!
The length of the wire before bending is something I was struggling with so I worked out a formula to get the length just right every time regardless of the finished clip length.
I use the wire from Jim.

Title: Re: Derek Moran Line Clip Bender
Post by: john ohnimus on January 27, 2020, 09:58:15 PM

Thanks Brent.!!

Title: Re: Derek Moran Line Clip Bender
Post by: Derek Moran on January 28, 2020, 10:50:26 AM

Wow- it's been 15 years since I made the first clip bender. . .
Thank you, Brent and Jim.
Here's a copy of the drawing.
My best to all,
Derek Moran