stunthanger.com

General control line discussion => Open Forum => Topic started by: cory colquhoun on December 15, 2017, 01:48:30 PM

Title: Decal help
Post by: cory colquhoun on December 15, 2017, 01:48:30 PM

Bought a second hand Brodak p40 kit and there was no instruction manual, just not sure how the decals work, Don't seem to wanna peel off, help appreciated

  Thanks  cory

Title: Re: Decal help
Post by: kenneth cook on December 15, 2017, 02:12:24 PM

       I believe they're water transfer. Cut one out and let it soak for 20-30 seconds in lukewarm water and carefully slide it off of the backing and onto the work.

Title: Re: Decal help
Post by: Fred Cronenwett on December 16, 2017, 04:10:25 PM

You can also create your own decals, scan any existing artwork, JPG from the internet, older decals or make your own and print them out. You do have to clear coat them before put them down since the water tends to lift the ink off the page

http://www.beldecal.com/inkjet_decals.cfm

Fred

Title: Re: Decal help
Post by: cory colquhoun on December 16, 2017, 05:34:21 PM

Thanks guys, they came off fine as Kenneth suggested, good to know about DIY decals also Fred.


 Cory