stunthanger.com

General control line discussion => Open Forum => Topic started by: Dane Martin on December 14, 2015, 01:39:22 PM

Title: Control line craftsman site news
Post by: Dane Martin on December 14, 2015, 01:39:22 PM

Hi guys! We have some updates to clcraftsman.com
A new board that's actively monitored titled "members build projects". This board is intended to be an easy going place to post pics of what you're building and ask questions.
 Also, if you're an experienced builder; check out the site! Every control line flyer i know says building is a dying art. Help support a site that's dedicated to supporting building!

Title: Re: Control line craftsman site news
Post by: wwwarbird on December 14, 2015, 06:29:18 PM

Quote from: Dane Martin on December 14, 2015, 01:39:22 PM

A new board that's actively monitored titled "members build projects". This board is intended to be an easy going place to post pics of what you're building and ask questions.
 Also, if you're an experienced builder; check out the site! Every control line flyer i know says building is a dying art. Help support a site that's dedicated to supporting building!

 Ok don't get me wrong, but please bear with me here...

 I've really been enjoying watching as much new video as I can squeeze in on the CLC site but referring to (and at times adding to) most of these topics are the main reasons I've been addicted to Stunthangar since it's inception. No offense, but not all of us are retired and have tons of extra time to watch hours worth of video. If you ask me it's becoming more and more difficult to "keep up" with information between the two sites. Trying to do so has actually been cutting into some of my own building time, time that is hard to find as is. Other than the video tutorials (which are great BTW) in many cases I'd just prefer to keep checking in at (and adding to) Stunthangar's "Building Techniques" section like I always have. To me, adding a separate "Member's Build Projects" section just seems redundant.
 
 Thanks for all the effort, it is appreciated, but just some thoughts for ya'll to consider. H^^  

Title: Re: Control line craftsman site news
Post by: Dane Martin on December 14, 2015, 10:21:46 PM

I understand your point, and thank you for your response. I actually thought of that after i put up that board. But, i think my intent was for folks to be able to ask a question, be able to post a specific pic and get a video response. Also, maybe to see a little more dialogue going on the site. I'm in the same boat as you, i like to watch the how to videos, but not sure what to ask for. Then, on the other hand, i like to post the videos, but wonder if there's anything people might want to see... Lol

Thanks for the input Wayne

Title: Re: Control line craftsman site news
Post by: RC Storick on December 14, 2015, 11:20:40 PM

Your doing fine Dane.
Here is a short clip review os some new equipment for videos Zoom H4N audio recorder

https://youtu.be/R1DTEN8N8vQ

Title: Re: Control line craftsman site news
Post by: RC Storick on December 15, 2015, 10:27:13 AM

check CLC for P51 paint stream today at 12:00 CST

Title: Re: Control line craftsman site news
Post by: Jim Dincau on December 15, 2015, 12:25:50 PM

missed it didn't get on the computer till 11:15 PST and saw your message on stunt hangar

Title: Re: Control line craftsman site news
Post by: RC Storick on December 15, 2015, 01:50:29 PM

Quote from: Jim Dincau on December 15, 2015, 12:25:50 PM

missed it didn't get on the computer till 11:15 PST and saw your message on stunt hangar

Video of the stream is uploading in edited format right now. Should be another hour it will be up I will post a link.

Title: Green video posted
Post by: RC Storick on December 15, 2015, 03:09:20 PM

https://youtu.be/wdLjAtVFuBE

Title: Re: Control line craftsman site news
Post by: wwwarbird on December 15, 2015, 09:19:31 PM

 I think the green looks good Sparky, maybe just a touch light but I'd leave it. Kind of reminds me of the earlier O.D. they used, which would be right in the timeframe for a "B" model Mustang anyway. Once all the other markings are done it'll all fall into place. y1

 Good thing is you still have enough left for your T-Bolt!  S?P