stunthanger.com

General control line discussion => Open Forum => Topic started by: frank mccune on June 25, 2014, 07:05:18 PM

Title: Comtact information for bill lee engine builder
Post by: frank mccune on June 25, 2014, 07:05:18 PM

     Hi:

      I give up looking for his contact information in this site.  Can somebody help me contact him?

                                                                                                                       
                                                                                                                     Tia,

                                                                                                                     Frustrated Frank

Title: Re: Comtact information for bill lee engine builder
Post by: RC Storick on June 25, 2014, 07:16:38 PM

Quote from: frank mccune on June 25, 2014, 07:05:18 PM

     Hi:

      I give up looking for his contact information in this site.  Can somebody help me contact him?

                                                                                                                       
                                                                                                                     Tia,

                                                                                                                     Frustrated Frank

Click on his name

Title: Re: Comtact information for bill lee engine builder
Post by: bob whitney on June 25, 2014, 07:57:07 PM

are u sure u have the right first name

Title: Re: Contact information for bill lee engine builder
Post by: Steve Helmick on June 25, 2014, 08:02:09 PM

Up at the top, where it lists "Home", etc., scan to the right and click "Members", then page 11...near top of page. Still, there's no guarantee that it's a current addy. Folks tend to change often and forget to update everywhere.
It might be best to send a PM. Bill is often active on the CAD forum.  H^^ Steve

Edit: I would also wonder if you're looking for Bill, Jim, or Clarence Lee. What are you trying to get done?

Title: Re: Comtact information for bill lee engine builder
Post by: Howard Rush on June 25, 2014, 11:14:43 PM

Don't forget Robt. E. or Bruce.  Three, four, five, look at him jive.

Title: Re: Comtact information for bill lee engine builder
Post by: frank mccune on June 26, 2014, 05:23:22 AM

     Hi:

      Yes. it is Clarence Lee that I am looking for!

      Thanks for the replies!

                                                                                                 Stay well my friends,

                                                                                                 Frank

Title: Re: Comtact information for bill lee engine builder
Post by: Jim Thomerson on June 26, 2014, 07:03:43 AM

Clarence lee usually has an ad in Model Aviation.

Title: Re: Comtact information for bill lee engine builder
Post by: John Leidle on June 27, 2014, 12:02:30 AM

  For some reason I hadn't had a good laugh today,,I normally do but I think being so close to the Nats & working in the yard removed my sense of humor   but Howard you just got me to crack up  big time.
   John L.

Title: Re: Comtact information for bill lee engine builder
Post by: Steve Helmick on June 28, 2014, 05:52:00 PM

Quote from: Howard Rush on June 25, 2014, 11:14:43 PM

Don't forget Robt. E. or Bruce.  Three, four, five, look at him jive.

Howard, you forgot Tommy Lee. That makes six, and it doesn't rhyme for chit, unless you use "sticks" or "picks" or um, "hicks".  LL~ Steve