stunthanger.com

General control line discussion => Open Forum => Topic started by: Gordon Tarbell on April 15, 2017, 08:47:39 PM

Title: Color Code for Eather props
Post by: Gordon Tarbell on April 15, 2017, 08:47:39 PM

Any one able to confirm the Color Code of Eather props? I have some Blue ones, Green ones, and Red ones . All are three blade except one two blade. The two blade is the only one that is finished and is hand marked with dia. and pitch(11 3/8"X5 3/4). All the three bladed props are unfinished with lots of mold flashing to be sanded off and not marked for pitch or dia. The Red two blade I have has a healthy amount of under camber , hard to tell on the unfinished three blade props I have.

Title: Re: Color Code for Eather props
Post by: Russell Bond on April 15, 2017, 08:54:28 PM

You can contact him direct;

brianea@optusnet.com.au

Title: Re: Color Code for Eather props
Post by: tom brightbill on April 15, 2017, 08:56:56 PM

I asked Brian that exact same question a few months ago. He replied that given all the different types of props he makes that there are way too many to color code. Long story short, there is no code.

Title: Re: Color Code for Eather props
Post by: Steve Helmick on April 17, 2017, 12:27:21 AM

I have some red ones and some blue ones. The red ones are all significantly u/c, while the blue ones are all "flatback" as he calls them. No clue about green, because I have none. I like the red ones, if you don't!  :) Steve

Title: Re: Color Code for Eather props
Post by: Keith Miller on April 17, 2017, 08:00:25 PM

The Eather Bunny should know... ~>