News:



  • April 19, 2024, 10:27:25 PM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: Pit Paste  (Read 827 times)

Offline frank williams

  • 24 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 829
Pit Paste
« on: March 26, 2018, 12:59:37 PM »
I've been using this stuff for a couple of years and like it for filling dents and dings.  Its more "substantial" than some of the really light weight fillers.  I get it at the fishing tackle supply in the rod building section.  Its water based and dries fairly firm.
Logged

Offline Jim Svitko

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 694
Re: Pit Paste
« Reply #1 on: March 26, 2018, 01:08:34 PM »
Is it compatible with dope?  Some of these filler products, such as Model Magic (Model Tragic), turned to mush when dope was applied over it.
Logged

Offline Steve Helmick

  • AMA Member and supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 9933
Re: Pit Paste
« Reply #2 on: March 26, 2018, 01:13:31 PM »
Is this stuff used to patch porosities in cork handles, by chance? It looks like it would be ok with raspberry jam on pumpernickel.  H^^ Steve
Logged
"The United States has become a place where professional athletes and entertainers are mistaken for people of importance." - Robert Heinlein

In 1944 18-20 year old's stormed beaches, and parachuted behind enemy lines to almost certain death.  In 2015 18-20 year old's need safe zones so people don't hurt their feelings.

Offline frank williams

  • 24 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 829
Re: Pit Paste
« Reply #3 on: March 26, 2018, 01:23:44 PM »
Its used to repair cork rod handles .... I haven't found any incompatibilities.
Logged

Offline bill bischoff

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 1702
Re: Pit Paste
« Reply #4 on: March 26, 2018, 02:39:13 PM »
Pit paste? The jokes practically write themselves!  n~
Logged

Offline Mike Haverly

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 844
Re: Pit Paste
« Reply #5 on: March 26, 2018, 02:39:18 PM »
I haven't tried that yet, I might.  I've been using this stuff lately.  It's compatible with dope, I have even mixed it with dope into  a thin paste.  It's heavy, "a little dab will do you".  It's inexpensive and goes a looong ways!
https://www.autobodytoolmart.com/usc-pronto-kombi-spot-putty-32046-p-15715.aspx?gclid=Cj0KCQjwtOLVBRCZARIsADPLtJ0OJjttFAYIIzJPITuUkW5tI8z3zEWxovctqPKIFkqzfyxJ-p6D7WEaAi7EEALw_wcB
Logged
Mike

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags:
 


Advertise Here