stunthanger.com

General control line discussion => Open Forum => Topic started by: Wynn Robins on May 31, 2006, 08:40:51 PM

Title: Brodak Spinners
Post by: Wynn Robins on May 31, 2006, 08:40:51 PM

anyone have pics available of the new spinners brodak are releasing??

Title: Re: Brodak Spinners
Post by: Sam Laughery on May 31, 2006, 08:48:01 PM

I'll try and get some tomorrow for you.

Sam

Title: Re: Brodak Spinners
Post by: Bob Reeves on June 01, 2006, 01:02:46 AM

See the Uniflow Tank thread below for a picture of one on My Skylark...

Title: Re: Brodak Spinners
Post by: Hank on June 01, 2006, 01:50:46 PM

Below ??? ??? ??? ??? ??? ???
Hank

Title: Re: Brodak Spinners
Post by: peabody on June 01, 2006, 02:07:59 PM

I saw one of the 2" two blade models Sunday....very light, cut for a 6 pitch but usable with a Bolly, and the supplied backplate, knurled on both surfaces (a good thing) had a bit of standoff from the drive.......

As an aside, those that have created aeroplanes with Dave Brown or Randy spinners can use the Randy backplate (either carbon or aluminum) or the Windy carbon unit.

Good quality...

Another shortcoming is that they come with only 1/4" adaptors.

Good quality and a nice shape.

Title: Re: Brodak Spinners
Post by: Bob Reeves on June 01, 2006, 02:44:47 PM

Quote from: Hank on June 01, 2006, 01:50:46 PM

Below ??? ??? ??? ??? ??? ???
Hank

http://stunthanger.com/smf/index.php?topic=823.0

Title: Re: Brodak Spinners
Post by: Sam Laughery on June 01, 2006, 02:50:50 PM

Here's the 1 1/2" and the 2 1/2".

Title: Re: Brodak Spinners
Post by: airbrush on June 05, 2006, 04:39:44 PM

Anybody know when these will be out, I was over at brodaks yesterday and couldn't find them, So, I'm
assuming thet they haven't been listed yet.
Does anyone know if 1 3/4 inch spinners will be available?

thanks for your time,
james

Title: Re: Brodak Spinners
Post by: Bob Reeves on June 05, 2006, 05:37:36 PM

1/2 sizes (1-1/2, 2, 2-1/2) should be available unless he already sold out. Did you ask, might not have them out..

My understanding is the 1/4 sizes including 1-3/4 will come in with the Strega ARF shipment, August I think..

Title: Re: Brodak Spinners
Post by: Sam Laughery on June 05, 2006, 09:28:20 PM

I was there Sunday and the 1 1/2 and 2 1/2 were hanging in the vicinity of the other spinners.  I'll see if I can find out when the others are coming.

Sam

Title: Re: Brodak Spinners
Post by: Sam Laughery on June 06, 2006, 04:32:50 PM

I spoke with John today.  Bob is correct.  Thre 1 1/2, 2, 2 1/2 are available.  The 1/4 inch sizes late July early August.

Sam