stunthanger.com
General control line discussion => Open Forum => Topic started by: Mike Griffin on January 25, 2020, 01:38:02 PM
-
I have been in touch with Mike Hanson at RSM and I am going to bring back a couple of Kits I came out with a few years ago. They are Steve Busso's Jaguar and Allan Brickhaus's 746P Buccaneer Profile.
I have not produced any kits since the increase in Balsa prices so Mike is going to cut me a kit of each when his shipment from Bud Nosen arrives which we hope will be within the next couple of weeks.
In order to keep the prices as reasonable as possible, I am going to make them "short" Kits. The definition of short kit would be all the laser cut parts necessary to build the model. There will also be a landing gear, a plan and a canopy (for the Jaguar). There will be no sticks, sheeting or control hardware in the kits. However, that can be purchased separately if you do not have access to the material.
I have a 9 people so far that wanted to be put on the waiting list for kits so I told Mike to cut me one of each when his balsa shipment arrives and then I will have a firm price to give you. Being on a waiting list in no way obligates you to buy a kit. It only means you want one and will be in que when the time comes to order. If you want to be put on the waiting list, please go to my section in Vendors Corner and sign up. I will come back and put a link on here that will take you directly to it.
I will post a couple of pictures with this so you can see what the models look like.
Here is the link that will take your direct to the sign up sheet.
https://stunthanger.com/smf/griffin's-model-service/sign-up-here-for-a-jaguar-or-746p-short-kit/new/#new
Thank you
Mike