Author Topic: borad (Read 6604 times)

John Desrosiers · « **on:** April 13, 2012, 05:15:16 PM »

What do you do when you have nothing to do? Nothing to build or cover or paint. I,m borad.

Mark Scarborough · « **Reply #1 on:** April 13, 2012, 05:25:21 PM »

Loooks like its time for a shopping spree,, need some kits?

Clint Ormosen · « **Reply #2 on:** April 13, 2012, 05:28:26 PM »

Quote from: John Desrosiers on April 13, 2012, 05:15:16 PM

What do you do when you have nothing to do? Nothing to build or cover or paint. I,m borad.

Study the dictionary?

Tim Wescott · « **Reply #3 on:** April 13, 2012, 05:29:38 PM »

I go flying. Then I have something to repair, cover, and paint.

Steve Helmick · « **Reply #4 on:** April 13, 2012, 06:02:32 PM »

Quote from: Clint Ormosen on April 13, 2012, 05:28:26 PM

Study the dictionary?

Crap! I thought this thread was a review of the new Borad movie.

Mike Keville · « **Reply #5 on:** April 13, 2012, 06:10:33 PM »

Anyone else waiting for Howard Rush to jump on this one?

Randy Powell · « **Reply #6 on:** April 13, 2012, 06:25:16 PM »

Tim,

Only for some.

Paul Taylor · « **Reply #7 on:** April 13, 2012, 06:29:39 PM »

Heck it is flying season, not building season.

Unless you are from a land down under.

John Desrosiers · « **Reply #8 on:** April 13, 2012, 06:41:52 PM »

yes I need something to build but I dont have any money. Thats nothing new. Way to meny bills to pay. What do you guys do? I dont like watching tv.

Joejust · « **Reply #9 on:** April 13, 2012, 06:50:57 PM »

Sit down with a sheet or two of paper and start designing your next plane. Surf the net for balsa prices etc and find out how much your latest might cost if you ever get money ahead. Go to the narest contest you can and volunter to help. Read all the colums on this site and learn what others are doing.
Joe

wwwarbird · « **Reply #10 on:** April 13, 2012, 08:35:57 PM »

Borad. Hmm. Is that French?

dave siegler · « **Reply #11 on:** April 14, 2012, 06:02:35 AM »

Download one of the free cad programs like google sketch up. And start drawing your next one

Take an inventory of the stuff in your shop. (and clean it) Old kits and engines might be able ot be sold and turned into money to finace a new project

Find a friend that has mone money than time and build something for him.

john e. holliday · « **Reply #12 on:** April 14, 2012, 09:14:55 AM »

Well John, I went to your profile to see where you are located and nothing there. If you were close enough I could probably help. What do you know about riding lawn mowers, by the way?

Garf · « **Reply #13 on:** April 14, 2012, 09:24:07 AM »

Contact Chuck Feldman, the cardboard king. You can use alternate (found) materials. You don't get any world beaters, but it works real well for sport models. Cloroplast, (signs) works well too.

John Desrosiers · « **Reply #14 on:** April 14, 2012, 02:23:37 PM »

oh boy here we go. I,ll regret this post.

John Desrosiers · « **Reply #15 on:** April 14, 2012, 03:54:40 PM »

Hay doc, I am in plaistow nh. sorry, I cant cut your grass.

Mike Keville · « **Reply #16 on:** April 14, 2012, 05:26:25 PM »

Quote from: Garf on April 14, 2012, 09:24:07 AM

Contact Chuck Feldman, the cardboard king...

That's Chuck FELTON, not Feldman.

Randy Powell · « **Reply #17 on:** April 14, 2012, 06:48:22 PM »

I've never been bored. What's that like?

wwwarbird · « **Reply #18 on:** April 14, 2012, 09:37:26 PM »

Quote from: Randy Powell on April 14, 2012, 06:48:22 PM

I've never been bored. What's that like?

I've been bored, but I still haven't quite figured out what borad is.

dennis lipsett · « **Reply #19 on:** April 15, 2012, 07:49:04 AM »

I wonder if anyone really uses the spell check feature of the forum.

Wayne Collier · « **Reply #20 on:** April 15, 2012, 07:53:58 AM »

Quote from: dennis lipsett on April 15, 2012, 07:49:04 AM

I wonder if anyone really uses the spell check feature of the forum.

yes

john e. holliday · « **Reply #21 on:** April 15, 2012, 08:25:52 AM »

Why do you think so many words are mispelled. It now the mowing I need done, it is the mower itself. Have replaced starter solinoid, the key switch and a safety switch. The battery is good as I can hear the mower solinoid click when I pull the switch knob. Just no battery to the starter and can't find any breaks in wiring. Guess must be another saety switch somewhere I can't find.

jim gilmore · « **Reply #22 on:** April 15, 2012, 07:11:43 PM »

john where r you . you do list a state or location that I can tell..

Phil Hawkins · « **Reply #23 on:** April 15, 2012, 10:29:17 PM »

I agree... you can design your own plane! Then name it "Borad"

Mark Scarborough · « **Reply #24 on:** April 15, 2012, 11:07:53 PM »

Quote from: Randy Powell on April 14, 2012, 06:48:22 PM

I've never been bored. What's that like?

I wonder if its related to that whole 'planking" phenom,,, oh wait, that would likely be board, hmmm

wwwarbird · « **Reply #25 on:** April 16, 2012, 10:40:27 AM »

Quote from: Mark Scarborough on April 15, 2012, 11:07:53 PM

I wonder if its related to that whole 'planking" phenom,,, oh wait, that would likely be board, hmmm

John Desrosiers · « **Reply #26 on:** April 16, 2012, 10:54:21 AM »

I live Plaistow NH. 03865. 15 culver st. # 53 JOHN DEROSIERS.

Bob Reeves · « **Reply #27 on:** April 16, 2012, 03:17:33 PM »

Quote from: john e. holliday on April 15, 2012, 08:25:52 AM

Why do you think so many words are mispelled. It now the mowing I need done, it is the mower itself. Have replaced starter solinoid, the key switch and a safety switch. The battery is good as I can hear the mower solinoid click when I pull the switch knob. Just no battery to the starter and can't find any breaks in wiring. Guess must be another saety switch somewhere I can't find.

Find and check the blade engagement safety switch, it will prevent the starter from engaging.

Mark Scarborough · « **Reply #28 on:** April 16, 2012, 03:28:21 PM »

there is also a safety switch under the seat on a lot of the newer mowers,, wont start without butts in the seat

Scott Hartford · « **Reply #29 on:** April 16, 2012, 04:48:45 PM »

Starter contacts.....

Bob Reeves · « **Reply #30 on:** April 16, 2012, 05:36:39 PM »

Quote from: Mark Scarborough on April 16, 2012, 03:28:21 PM

there is also a safety switch under the seat on a lot of the newer mowers,, wont start without butts in the seat

That's the first one that gets bypassed on any mower I've owned, next is the reverse cutout. Don't feel I need protection from stupidity by the manufacture

Mike Keville · « **Reply #31 on:** April 16, 2012, 05:57:15 PM »

Well, Doc, I hope you get that mower started soon. Otherwise you could become 'borad'.

jim gilmore · « **Reply #32 on:** April 16, 2012, 06:05:29 PM »

John D I know you said your bored. You have some dope,glue and a .15-25 engine on hand ?

Bill Little · « **Reply #33 on:** April 16, 2012, 06:51:17 PM »

Quote from: John Desrosiers on April 13, 2012, 05:15:16 PM

What do you do when you have nothing to do? Nothing to build or cover or paint. I,m borad.

Hi John,

I am "bored" but for a totally different reason! It just isn't real safe for me to make the trek up and down my stairs to my workshop, yet. Still recovering! But, I make build lists, check off lists for the work that needs to be done once I can get there. I have too much to do, but can't get to it yet! Besides, the feelings haven't completely returned in my hands/fingers.....

Good Luck,
Bill

John Desrosiers · « **Reply #34 on:** April 16, 2012, 06:59:06 PM »

God bless you bill. Thanks for your replay.

jim gilmore · « **Reply #35 on:** April 18, 2012, 07:57:30 PM »

John you have not answered my question... Do you have gloe and dope ? and you'll need a good .15 - .29 8-)
Hope to have something in the mail by friday.

John Desrosiers · « **Reply #36 on:** April 19, 2012, 05:26:51 AM »

Yes I have an os 25 and an old fox 25

John Desrosiers · « **Reply #37 on:** April 19, 2012, 05:28:59 AM »

thank you Jim.

jim gilmore · « **Reply #38 on:** April 19, 2012, 11:30:42 AM »

you getting an f or p 51 from larry richards, to build. If you can upload a photo or two.
I know I have more than I can buil right now. Its packaged and soon as I get it to the post office it will be on its way.
Pick some nice color..Not army drab hahahah.

John Desrosiers · « **Reply #39 on:** April 19, 2012, 04:25:21 PM »

How dose all red with yellow trim sound to ya?

Wynn Robins · « **Reply #40 on:** April 19, 2012, 04:40:59 PM »

Hey Jim - I'm Borad to - and have some spare motors HA HA

jim gilmore · « **Reply #41 on:** April 19, 2012, 07:59:50 PM »

Hey I can pick and choose ...but hey I'd send ya a kit if you finsihed it and returned it to me. I've seen your work....

Wynn Robins · « **Reply #42 on:** April 19, 2012, 08:01:57 PM »

send me one - I'll build it - then you fly down here and fly it with me ....then you can take it home with you.... (i'll make it take apart)

jim gilmore · « **Reply #43 on:** April 30, 2012, 03:34:42 PM »

Paul I maybe could do something like that next year but this yeal travel is just to get home right now.
BTW where are you ?

Author Topic: borad (Read 6604 times)

Joejust