stunthanger.com

General control line discussion => Open Forum => Topic started by: Bootlegger on April 09, 2011, 09:56:42 AM

Title: ...Bob Hunt and Pat Johnson
Post by: Bootlegger on April 09, 2011, 09:56:42 AM

 #^  Just wanted to say how much I enjoyed the article in PAMPA about setting up a venturi to keep from getting the dreaded "run away's".
  There is a lot of info in that article.
  Bob and Pat, thanks again,    <=

Title: Re: ...Bob Hunt and Pat Johnson
Post by: john e. holliday on April 10, 2011, 07:19:45 AM

Now you make me want to drop what I am doing and load the CD.  They are two of the many people in modeling that are willing to help. H^^

Title: Re: ...Bob Hunt and Pat Johnson
Post by: Dick Pacini on April 10, 2011, 07:41:54 AM

Quote from: Bootlegger on April 09, 2011, 09:56:42 AM

#^  Just wanted to say how much I enjoyed the article in PAMPA about setting up a venturi to keep from getting the dreaded "run away's".
  There is a lot of info in that article.
  Bob and Pat, thanks again,    <=

Where can that article be found?  I looked in the PAMPA website without success.

Title: Re: ...Bob Hunt and Pat Johnson
Post by: Bootlegger on April 10, 2011, 10:09:05 AM

 #^   Dick it start's on page 50 in the March/April  '11 issue.
 Hope this helps..

Title: Re: ...Bob Hunt and Pat Johnson
Post by: Dick Pacini on April 10, 2011, 12:22:56 PM

Quote from: Bootlegger on April 10, 2011, 10:09:05 AM

#^   Dick it start's on page 50 in the March/April  '11 issue.
 Hope this helps..

Yup. Found it.  Actually, I had already read it.  This time, I went back and paid attention. HB~> n~