stunthanger.com
General control line discussion => Open Forum => Topic started by: Bootlegger on March 26, 2015, 11:26:49 AM
-
Guy's I am looking for a set of B/stormer wing plans. Has anybody got a set that they can copy, and how much?
Thanks
-
there is a complete set of plans on EBAY
-
Trixter Barnstormer
http://www.ebay.com/itm/Vintage-BARNSTORMER-Old-Time-UC-Stunt-Model-Airplane-PLANS-All-Parts-Patterns-/221725207613?pt=LH_DefaultDomain_0&hash=item339fda2c3d
-
I would have to imagine Brodak probably has the plans for their kit. The AMA plans service has them available too. Assuming you're an AMA member you can go in the Model Aviation online archive and find the article on the Barnstormer. The AMA plan is a little off, like the stabilizer and elevator being labeled backwards, but they're workable.
-
You can get a complete laser cut rib set from Brodak about $12. You can call them to place the order and get them to ship it regular ground shipping instead of the overnight (saves about $8).
SKU CLB-80RS
Best, DennisT
-
Download for free a complete set of plans here:
http://www.outerzone.co.uk/plan_details.asp?ID=3658
-
Gil,
Check your e-mail.
Gary
-
Download for free a complete set of plans here:
http://www.outerzone.co.uk/plan_details.asp?ID=3658
Those are the AMA plans... Check out the Stabilizer with the horn bolted to it. LOL
-
Those are the AMA plans... Check out the Stabilizer with the horn bolted to it. LOL
I don't get it?
-
I don't get it?
How about now?
(http://i140.photobucket.com/albums/r26/fbodies/public%20model%20airplane%20stuff/barnstrmr.jpg)
-
How about now?
(http://i140.photobucket.com/albums/r26/fbodies/public%20model%20airplane%20stuff/barnstrmr.jpg)
I still don't get it. What was so funny that you LOL!
-
Just that the "ELEV. HORN" is bolted to the part that is labeled "STABILIZER". I'm not sure why the "elevator" apparently has a cut-out in the middle either. I want to say there are some other head scratchers on that plan sheet, but it's been a few years since I looked at it.
-
Just that the "ELEV. HORN" is bolted to the part that is labeled "STABILIZER". I'm not sure why the "elevator" apparently has a cut-out in the middle either. I want to say there are some other head scratchers on that plan sheet, but it's been a few years since I looked at it.
OK. Now I see what you mean! It is funny!
-
On the Guillow's plan the H-stab/elevator is depicted in-place with the fuselage top block hiding the center of the H-stab. When the FM plans were drawn that subtlety wasn't picked up and the apparent cutout was the result.