stunthanger.com
General control line discussion => Open Forum => Topic started by: dave siegler on August 28, 2017, 09:54:47 AM
-
So the banana plugs keep falling you of my power panel, got any ideas. starter cable is stiff.
replace the plugs and the sockets?
I have been tweating the plugs to make them tigher but not too sucessful.
-
You can "expand" the plug. Put it in a vise and tap the end until it expands. Most electronic stores have replacements.
Floyd
-
4mm brushless motor bullet connectors will fit and work better. Or, you could wire a Deans Ultra plug socket right to the battery, and install a matching plug on the starter. I bet it won't accidentally come apart!
-
I noticed that some of the power panels & other banana plugs don't fit so well. Plugs are under-size.
I have been buying banana plug patch cables from a high end electrical supplier and cutting them in half to make two good-quality plugs. The cable is factory-sealed to the wire.
Pomona. B-48-2. pomonaelectronics.com
-
You could try these.
https://www.amazon.com/Locking-Stacking-Carbonate-Insulated-Thumbscrew/dp/B00O3NTB28/ref=pd_day0_23_7?_encoding=UTF8&psc=1&refRID=AYV09WH0SBHTNQT3R9ZF
-
You could try these.
https://www.amazon.com/Locking-Stacking-Carbonate-Insulated-Thumbscrew/dp/B00O3NTB28/ref=pd_day0_23_7?_encoding=UTF8&psc=1&refRID=AYV09WH0SBHTNQT3R9ZF
$24?!?! Yikes.
-
Hi Dave:
I must concur that a good banana plug is a rare item! I have tried three different brands and the spring fingers are made of some type of dead soft metal. I expand them for tight fit, and they are deformed, ruined, the first use.
Where has all of the quality in goods gone?
Frank McCune
-
It went up to $24 and gold plated.... Radio Shack $2.99 sets of 4 were always junk
-
I have changed almost all of my power panel and electric starter connections to Deans Plugs the one I haven't keeps coming apart at the worst times
-
Hello Bob:
Where does on obtain Deans Plugs?
Tia,
Frank McCune
-
it you use deans plugs or bullet connectors, do you have pigtail off the battery? or something else?
D you have some panel mount solution?
I have a mess of Anderson power poles that I wont use for e- flight. I may do that.
I need to to that with my glow leads as well.