News:


  • May 02, 2025, 09:02:45 AM

Login with username, password and session length

Author Topic: Balsa substitute  (Read 4120 times)

Offline Ara Dedekian

  • 24 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 497
  • Ara Dedekian
Balsa substitute
« on: July 22, 2023, 05:53:50 AM »

       Kerdi Board is a waterproof backing for phony-stone shower panels. It's an extruded polystyrene foam with a .025 film on each side giving it a stiffness and, according to Sparky's density calculator, my 1/2" thick piece came out to 6.22lb/cu ft. It comes in thicknesses from 3/16" to 1" thick.

       The 6lb/cu ft is what got my attention. Can it be used for our purposes? Maybe a geodesic profile fuselage faced with balsa? Just wondering.

      Ara

     

Online Ken Culbertson

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 6953
Re: Balsa substitute
« Reply #1 on: July 22, 2023, 06:55:24 AM »
I have often wondered about 1/2' aluminum honeycomb core for profile fuselages.  Covered with 1/64" plywood or .5mm CF they should be quite stiff and light.  Anybody tried that?  I would also think 1/8" should work for flaps and stabs.  With the price of balsa as high as it is I would think this might be a viable option...or not.

Ken
AMA 15382
If it is not broke you are not trying hard enough.
USAF 1968-1974 TAC

Online Steve Berry

  • Moderator
  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 520
Re: Balsa substitute
« Reply #2 on: July 22, 2023, 08:20:26 AM »
Assuming you can find it, Depron is a pretty good substitute. Use it for ribs with spruce spars and sheet the wing with the thinnest version of it, and you're ready for glass and finishing epoxy.

Steve

Sent from my SM-N986U using Tapatalk


Online Ken Culbertson

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 6953
Re: Balsa substitute
« Reply #3 on: July 22, 2023, 08:39:02 AM »
Assuming you can find it, Depron is a pretty good substitute. Use it for ribs with spruce spars and sheet the wing with the thinnest version of it, and you're ready for glass and finishing epoxy.

Steve

Sent from my SM-N986U using Tapatalk


E-Bay
Depron Foam Sheets White 6mm Thick 12" x 31.4" sheetOpens in a new window or tab
Brand New
$8.99Top Rated PlusBuy It Now+$38.68 shippingFree returns
AMA 15382
If it is not broke you are not trying hard enough.
USAF 1968-1974 TAC

Offline Tim Wescott

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 12870
Re: Balsa substitute
« Reply #4 on: July 22, 2023, 09:11:33 AM »
Maybe a geodesic profile fuselage faced with balsa?

It would probably be better to strip off the fiber part -- which probably doesn't add much strength and will certainly add weight -- then face with balsa.

I think folks have published notes on foam-core profile fuselages with balsa or carbon-fiber facing.  There's also folks building all-composite stunt aircraft.

I don't have any old price sheets lying around, but is balsa really more expensive in real terms, or is it just inflating in price along with everything else?  If you take the price of a sheet of 1/8" contest balsa from 1962 and adjust it for inflation, how does it compare to a sheet of 1/8" contest balsa today?
AMA 64232

The problem with electric is that once you get the smoke generator and sound system installed, the plane is too heavy.

Online Steve Berry

  • Moderator
  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 520
Re: Balsa substitute
« Reply #5 on: July 22, 2023, 09:17:40 AM »


I don't have any old price sheets lying around, but is balsa really more expensive in real terms, or is it just inflating in price along with everything else?  If you take the price of a sheet of 1/8" contest balsa from 1962 and adjust it for inflation, how does it compare to a sheet of 1/8" contest balsa today?

Now that is what is really needed. We keep wanting balsa prices to be the same as 20+ years ago, even though everything else has gone up in price.

Steve

Sent from my SM-N986U using Tapatalk


Offline Paul Wescott

  • 21 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 491
Re: Balsa substitute
« Reply #6 on: July 22, 2023, 09:50:58 AM »
I don't have any old price sheets lying around, but is balsa really more expensive in real terms, or is it just inflating in price along with everything else?  If you take the price of a sheet of 1/8" contest balsa from 1962 and adjust it for inflation, how does it compare to a sheet of 1/8" contest balsa today?

Balsa doesn’t grow on trees ya know…

Online Steve Berry

  • Moderator
  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 520
Re: Balsa substitute
« Reply #7 on: July 22, 2023, 09:54:23 AM »
Balsa doesn’t grow on trees ya know…
Technically, that is correct.

Sent from my SM-N986U using Tapatalk


Offline john e. holliday

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 22950
Re: Balsa substitute
« Reply #8 on: July 22, 2023, 10:00:00 AM »
I have 2 planes I built using foam board on one of them.  They are the Big Snapper with LA 25.  the one with foam board has only the ply wood parts and a balsa piece for leading edge.  Ready to fly there is only 6 ounces difference.  Have not posted picture of them as I want to see how they fly first. D>K
John E. "DOC" Holliday
10421 West 56th Terrace
Shawnee, KANSAS  66203
AMA 23530  Have fun as I have and I am still breaking a record.

Offline Paul Wescott

  • 21 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 491
Re: Balsa substitute
« Reply #9 on: July 22, 2023, 10:40:37 AM »
I have 2 planes I built using foam board on one of them.  They are the Big Snapper with LA 25.  the one with foam board has only the ply wood parts and a balsa piece for leading edge.  Ready to fly there is only 6 ounces difference.  Have not posted picture of them as I want to see how they fly first. D>K

Interested in the build!  Also, which one is 6oz lighter?

Offline Paul Wescott

  • 21 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 491
Re: Balsa substitute
« Reply #10 on: July 22, 2023, 10:42:59 AM »
Maybe a geodesic profile fuselage faced with balsa? Just wondering.

Ara

If you have a flat plank of Kerdiboard, faced/skinned with balsa, where does the “geodesic” come in?

Offline Mike Alimov

  • Trade Count: (0)
  • Commander
  • ****
  • Posts: 391
Re: Balsa substitute
« Reply #11 on: July 22, 2023, 11:57:32 AM »
I've vacuum bagged 1.6 oz glass on both sides of a 1/2" white bead polystyrene foam board (hot wired to desired thickness from discarded TV packaging), and it made for a light and stiff profile fuselage.

Offline Ara Dedekian

  • 24 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 497
  • Ara Dedekian
Re: Balsa substitute
« Reply #12 on: July 22, 2023, 12:39:28 PM »
If you have a flat plank of Kerdiboard, faced/skinned with balsa, where does the “geodesic” come in?

     Hello Paul,

          Below is a portion of Brodak's plan for a 1/2A Pathfinder. The diagonally framed and sheet covered profile fuselage shown in the plan is what I meant by, 'geodesic'. Triangular spaces or holes could be cut out of the Kerdiboard before skinning to save weight.

   Ara

Offline Dan McEntee

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 7447
Re: Balsa substitute
« Reply #13 on: July 22, 2023, 04:10:24 PM »
    This thread is simply mis-titled. There is NO substitute for balsa wood! What is being discussed are alternative construction methods and materials. Look at what all you have to do to replace one sheet of balsa. If it were that attractive, easy and cost effective, I would think that the cottage kit makers would have been using something else a long time ago, even if we are only talking about profile models. Some interested party should build a few profile models with these methods and put them in regular service to see how well they hold up to use with internal combustion engines. That would tell the tale.
  Type at you later,
   Dan McEntee
AMA 28784
EAA  1038824
AMA 480405 (American Motorcyclist Association)

Offline Dave_Trible

  • 24 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 6655
Re: Balsa substitute
« Reply #14 on: July 22, 2023, 05:58:46 PM »
This would also be my concern.  Several times including once recently I had to go back and fiberglass profile fuselages built with solid 1/2” balsa but softer/ lighter than about 12 lb. wood due to vibration issues.  Once encased in cloth and epoxy they eliminated poor engine run issues.  I also had the same problem with one of the built up- sheet covered profile kit fuselages.  I can’t imagine trying this with foam as a structural component.  I too sweat paying the balsa bill these days but not sure how you’d ever compare structures or costs.  Composites are far more expensive considering supplies, molds and time for very little net gain other than the fun of trying new things.  I think most builders these days don’t build more than one or two new airplanes a year.  That considered and compared to many other endeavors it’s not that bad.  (Says me)

Dave
AMA 20934
FAA Certificate FA3ATY4T94
 Investing in a Gaza resort if the billionaire doesn't take all my social security check

Offline kevin king

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1646
Re: Balsa substitute
« Reply #15 on: July 22, 2023, 08:12:51 PM »
Balsa doesn’t grow on trees ya know…
Fortunately i know a guy. 

Online 944_Jim

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 920
Re: Balsa substitute
« Reply #16 on: July 22, 2023, 09:24:41 PM »
Fortunately i know a guy.

Steven Tyler says "dude looks like a lady." LL~

Offline Dave Hull

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2096
Re: Balsa substitute
« Reply #17 on: July 22, 2023, 09:43:05 PM »
The Pailet Skylark--which is a beautiful plane--used 3/32" sitka spruce for the fuse sides and a lot of balsa for everything else....

Looks like they graded the balsa billets for weight, based on the end markings. Sure would be nice to have a pallet of the good stuff!

Online Steve Berry

  • Moderator
  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 520
Re: Balsa substitute
« Reply #18 on: July 22, 2023, 09:44:58 PM »
Steven Tyler says "dude looks like a lady." LL~

 LL~
Along those lines....Home Depot has a bunch of pine 2x4s that identify as contest grade balsa.

Offline Robert Whitley

  • 21 supporter
  • Trade Count: (0)
  • Commander
  • *
  • Posts: 308
Re: Balsa substitute
« Reply #19 on: July 22, 2023, 10:05:00 PM »
That was a great day trip with Kevin and Rosalie and yes the lifts of balsa blanks are colour coded for weight.
I loaded up much goodly with nice balsa so I’m good for quite a while.

Thanks to Kevin and John for helping out with my addiction.

Offline kevin king

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1646
Re: Balsa substitute
« Reply #20 on: July 23, 2023, 07:23:22 AM »
That was one of 20 pallets of balsa.

Offline Rusty

  • 24 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 460
Re: Balsa substitute
« Reply #21 on: July 23, 2023, 07:50:13 AM »
Why doesn't somebody make a control line model using the technique Lanier used in the 70s?  They made a plastic shell fuselage and foam wings covered with some sort of paper.  They were not competition level models, but they flew.  Some flew pretty good. 

Offline Gerald Arana

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1579
Re: Balsa substitute
« Reply #22 on: July 23, 2023, 10:29:57 AM »
Fortunately i know a guy.

OMG! I fail to see a shortage of Balsa Wood................  OBTW: You can mortgage/sell your house and have a pallet load!  LL~ LL~ LL~

Jerry

Offline Gerald Arana

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1579
Re: Balsa substitute
« Reply #23 on: July 23, 2023, 10:32:42 AM »
Why doesn't somebody make a control line model using the technique Lanier used in the 70s?  They made a plastic shell fuselage and foam wings covered with some sort of paper.  They were not competition level models, but they flew.  Some flew pretty good.

I learned to fly RC with a low wing trike gear Lanier model. I can't remember which one it was. It's been too long ago. ???

Jerry

Offline Paul Wescott

  • 21 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 491
Re: Balsa substitute
« Reply #24 on: July 23, 2023, 01:37:03 PM »
Foam board seems to be a pretty good substitute…

Flite Test Round-nose Bent-wing Corsair out of Foam-board:
https://www.flitetest.com/articles/ft-corsair-release

Photo of some random guy on social media making large scratch-build foam-board wings (below)


Offline john e. holliday

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 22950
Re: Balsa substitute
« Reply #25 on: July 23, 2023, 03:39:24 PM »
Interested in the build!  Also, which one is 6oz lighter?

The balsa one naturally. D>K


John E. "DOC" Holliday
10421 West 56th Terrace
Shawnee, KANSAS  66203
AMA 23530  Have fun as I have and I am still breaking a record.

Offline kevin king

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1646
Re: Balsa substitute
« Reply #26 on: July 23, 2023, 04:13:13 PM »
.
« Last Edit: July 23, 2023, 06:17:45 PM by kevin king »

Offline Istvan Travnik

  • 25 supporter
  • Trade Count: (0)
  • Commander
  • *
  • Posts: 301
Re: Balsa substitute
« Reply #27 on: July 23, 2023, 05:40:50 PM »
Dear Friends,
Why don't you state the titel: "Balsa substitute material + its technology?
If you afford my advise, there is a wonderful long road before every open minded comrade. Visit and follow a 11years old topic of mine: "The bluefoam model, or how to build a stunt plane without a bit of balsa?"
I promise every help, all tricks, every know-how, skills,  etc. just ask me!
Materials are close to you, at a fragment price...
Just start and won't get wrong, my friends!
Istvan 


« Last Edit: July 24, 2023, 03:04:28 PM by Istvan Travnik »

Offline Steve Helmick

  • 24 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 10239
Re: Balsa substitute
« Reply #28 on: July 23, 2023, 06:32:26 PM »
Fortunately i know a guy.

Are you sure that's a guy, Kev? Well, to be fair, these days you never know, and if he decides he's a she, then you have to take his/her word for it or risk being called a facist or something offensive like that.  y1 Steve
"The United States has become a place where professional athletes and entertainers are mistaken for people of importance." - Robert Heinlein

In 1944 18-20 year old's stormed beaches, and parachuted behind enemy lines to almost certain death.  In 2015 18-20 year old's need safe zones so people don't hurt their feelings.

Offline Curare

  • 2014 Supporters
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 801
Re: Balsa substitute
« Reply #29 on: July 23, 2023, 09:30:56 PM »
Assuming you can find it, Depron is a pretty good substitute. Use it for ribs with spruce spars and sheet the wing with the thinnest version of it, and you're ready for glass and finishing epoxy.

Steve

Sent from my SM-N986U using Tapatalk
Steve, I have a lot of 1/8" depron left over from my foamy RC days, and I've built wings using the depron as wing sheeting, but how do you go about making it for a stunt ship?
Greg Kowalski
AUS 36694

Online Steve Berry

  • Moderator
  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 520
Re: Balsa substitute
« Reply #30 on: July 23, 2023, 10:07:27 PM »
Steve, I have a lot of 1/8" depron left over from my foamy RC days, and I've built wings using the depron as wing sheeting, but how do you go about making it for a stunt ship?



Here's a great step by step tutorial. Granted, it's for RC, but can be adapted to CL easy enough.

Steve

Offline Curare

  • 2014 Supporters
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 801
Re: Balsa substitute
« Reply #31 on: July 23, 2023, 10:14:47 PM »


Here's a great step by step tutorial. Granted, it's for RC, but can be adapted to CL easy enough.

Steve
yep, pretty m,uch the exact same way I did the Staudacher below.

Greg Kowalski
AUS 36694

Offline Rusty

  • 24 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 460
Re: Balsa substitute
« Reply #32 on: July 24, 2023, 09:04:28 AM »
Just wondering why can't we grow Balsa in America?  I see acres and acres of landscaping tree farms in my area, so why can't somebody start growing Balsa here?


Offline Dave_Trible

  • 24 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 6655
Re: Balsa substitute
« Reply #33 on: July 24, 2023, 09:20:09 AM »
Just wondering why can't we grow Balsa in America?  I see acres and acres of landscaping tree farms in my area, so why can't somebody start growing Balsa here?
In short,  climate.  It may grow other places but there are really only two places on earth where the climate is perfect for growing quality balsa.  Those are Ecuador and New Guinea.  These are different varieties of balsa but basically the same other than the New Guinea wood is more yellow in color.  Balsa grows faster and has huge leaves.  It provides shade for other sprouting vegetation.  It also requires a huge amount of water.  There isn’t really a balsa shortage,  it just goes to the highest bidder.  At times that’s been US Navy ship builders and more recently blades for windmills.  For sure if we stop using much of it the supplies for our use will dry up.  BUY BALSA.

Dave
AMA 20934
FAA Certificate FA3ATY4T94
 Investing in a Gaza resort if the billionaire doesn't take all my social security check

Offline Dan McEntee

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 7447
Re: Balsa substitute
« Reply #34 on: July 24, 2023, 09:27:06 AM »
Just wondering why can't we grow Balsa in America?  I see acres and acres of landscaping tree farms in my area, so why can't somebody start growing Balsa here?

      You need a tropical climate, like what is found along the Equator, and even that is not a guarantee of successful growth. It takes a specific cross pollination for a balsa tree to grow. That was one reason for a previous shortage balsa out of Ecuador, that a surge in moonshine production that used a certain flower as part of it's recipe stunted the growth of balsa trees for a while.. In the areas around New Zealand, they have been able to successfully grow balsa on plantations but I think it is different than what we want for models. Look at some of the R/C ARFs that come out of China and examine the balsa that these are made from. it's almost clear with no grain, from what I have seen. From what I have read, most of the plantation grown product goes to industrial and other uses for the wood. Wood for model use is just a tiny fraction of the consumption of balsa wood and has been that was  for a long, long time.
   Type at you later,
    Dan McEntee
AMA 28784
EAA  1038824
AMA 480405 (American Motorcyclist Association)

Offline Steve Glass

  • Trade Count: (0)
  • Lieutenant
  • ***
  • Posts: 73
Re: Balsa substitute
« Reply #35 on: July 24, 2023, 02:34:33 PM »

Offline Steve Helmick

  • 24 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 10239
Re: Balsa substitute
« Reply #36 on: July 24, 2023, 08:23:46 PM »
My shower was refurbished using that Kerdi Board stuff on the floor pan and 3 walls. It seems like fairly dense foamboard with a waterproof layer on both sides, near as I can tell. The guy doing the remodelling said it was the way to go, but it costs more than cement board or 'blue board'. There's tile on walls and floors over it, and so far, so good. I'm sure it will outlive me.  :-\ Steve
"The United States has become a place where professional athletes and entertainers are mistaken for people of importance." - Robert Heinlein

In 1944 18-20 year old's stormed beaches, and parachuted behind enemy lines to almost certain death.  In 2015 18-20 year old's need safe zones so people don't hurt their feelings.

Offline PerttiMe

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 1182
Re: Balsa substitute
« Reply #37 on: July 25, 2023, 01:35:39 AM »
Foam board seems to be a pretty good substitute…

Flite Test Round-nose Bent-wing Corsair out of Foam-board:
https://www.flitetest.com/articles/ft-corsair-release

Photo of some random guy on social media making large scratch-build foam-board wings (below)


I believe they use Dollar Tree Foam Board. Something like: https://www.dollartree.com/readi-board-white-foam-boards/809955
Foam core with paper on both sides. Remove the paper, or not, depending on structural needs.
I built a Blue Pants as a kid. Wish I still had it. Might even learn to fly it.

Offline fred cesquim

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 909
    • Fred Cesquim Aeromodelos
Re: Balsa substitute
« Reply #38 on: July 25, 2023, 07:30:25 AM »

Now that is what is really needed. We keep wanting balsa prices to be the same as 20+ years ago, even though everything else has gone up in price.

Steve

Sent from my SM-N986U using Tapatalk

how much a balsa sheet cost in USA to jeopardize one´s life to build a plane each 2 year?
here in brazil cost the same as USA + 100% o import tax x 5 wich is our cambio rate. i am pretty sure our cost is about 8 times more
you can build without balsa? yes. will it perform the same? no
does it worth the performance and looks deterioration? i don´t think so


Tags: