stunthanger.com

General control line discussion => Open Forum => Topic started by: Leester on June 26, 2006, 08:07:37 PM

Title: Ball Links
Post by: Leester on June 26, 2006, 08:07:37 PM

I can't remember which # to get the #87 or #57 I know one needs a stand off and the other one the ball sticks out so you don't. I want the regular ones that don't need the stand off.  Thanks

Title: Re: Ball Links
Post by: Greg L Bahrman on June 26, 2006, 08:25:42 PM

Hi Lee,
I use the no. 87 Ball Link 1/4 in. H.D. The ball sticks out equally on both sides and the connection to the pushrod is a hole to accept a 4-40 threaded rod. It comes stock with a little standoff which is optional depending on your setup. Actually the package comes with 2 ball links and 2 standoffs, 2 screws and 2 nuts manufactured by Rocket City.

Title: Re: Ball Links
Post by: Leester on June 27, 2006, 03:21:15 AM

Thanks Greg: I order mine from www.controllinecentral.com he carry's the Tom Morris products. I can order the ball links without the hardware since I buy that in bulk.  j1 j1 j1 j1 #^ #^ #^