stunthanger.com

General control line discussion => Open Forum => Topic started by: Bootlegger on February 04, 2010, 10:03:21 AM

Title: Balance point
Post by: Bootlegger on February 04, 2010, 10:03:21 AM

    Mornin' Guy's  I need the balance point (C/G) for the Sig Skyray 35 size..
              Thanks a Lot, Gil

Title: Re: Balance point
Post by: Brett Buck on February 04, 2010, 11:39:55 AM

Quote from: Bootlegger on February 04, 2010, 10:03:21 AM

    Mornin' Guy's  I need the balance point (C/G) for the Sig Skyray 35 size..
              Thanks a Lot, Gil

 

    Start at 1" from the LE. You can move it back a little but as I recall the CG shown on the plans is way too far aft for my purposes.

The rest of the settings can be found here:

http://www.clstunt.com/htdocs/dc/dcboard.php?az=show_topic&forum=103&topic_id=198043&mesg_id=198043

    These are the exact settings I have right now on mine.  Note that the tipweight is determined using the counterweight method.

     Brett

Title: Re: Balance point
Post by: Bootlegger on February 05, 2010, 09:16:38 AM

   H^^     Thanks Brett, I appreciate the info...