General control line discussion => Open Forum => Topic started by: RC Storick on May 21, 2014, 05:32:23 AM
Title: Back plate mold video
Post by: RC Storick on May 21, 2014, 05:32:23 AM
One more added.
http://youtu.be/kDD7TY4BsYw
Title: Re: Back plate mold video
Post by: Glenn (Gravitywell) Reach on May 21, 2014, 08:17:25 PM
Cool beans! Good stuff and fun to watch! H^^
Title: Re: Back plate mold video
Post by: Doug Moon on May 22, 2014, 08:33:44 AM
Is there another video showing the finished product. Also, laying the carbon in the mold while it seems pretty straight forward would be helpful if there is a specific pattern or amount to be used.
Thanks Doug
Title: Re: Back plate mold video
Post by: Randy Cuberly on May 22, 2014, 01:07:39 PM
Great stuff Sparky!
I too would really like to see the process of putting the carbon into the mold.
If you're going to do much of that kind of molding a small bell jar might be a good investment to evacuate the air from the mold material, and from the epoxy for the finished product.
Thanks for the video!
Randy Cuberly
Title: Re: Back plate mold video
Post by: Bill Little on May 22, 2014, 02:55:25 PM
Thanks for the video, Sparky! Like the others, I would like to see how you prepare the material and place it in the mold.