stunthanger.com

General control line discussion => Open Forum => Topic started by: Mike Griffin on October 30, 2014, 04:46:56 PM

Title: Assembly Instructions for Mo Best
Post by: Mike Griffin on October 30, 2014, 04:46:56 PM

I have the instructions from page 11 on but need the very first part of the assembly instructions up to page 11.  Larry did this in a PDF file and if anyone has it, could you please e mail it to me at mikegriffin1947 at cox dot net. mikegriffin1947@cox.net

thank you

Mike

Title: Re: Assembly Instructions for Mo Best
Post by: Leester on October 30, 2014, 05:07:19 PM

Mike, Just sent them to you..

Title: Re: Assembly Instructions for Mo Best
Post by: Mike Griffin on October 30, 2014, 05:43:46 PM

I got it Lee.  Thank you
Mike

Title: Re: Assembly Instructions for Mo Best
Post by: Brent Williams on October 31, 2014, 01:36:12 AM

Here is a link to the PDF of the Mo Best.

http://www.control-line.org/Portals/57ad7180-c5e7-49f5-b282-c6475cdb7ee7/Mo'Best%20Profile%20CL%20Stunter.pdf

Title: Re: Assembly Instructions for Mo Best
Post by: Mike Griffin on October 31, 2014, 07:54:00 AM

Thank you Brent

Mike

Title: Re: Assembly Instructions for Mo Best
Post by: Robertc on October 31, 2014, 08:27:55 PM

Which fuse version you building?  Larry had at least three different versions.  I have Larry's computer files so if you have instructions for a different version, I should be able to help.  First version is just balsa fuse.  Second version is sheeted
from the back of the wing with the sheeting at 60 degree angle and third version has convex formers sheeted with either 1/32 or 1/64 ply.  The last version makes a very stiff fuse which was the idea.  Each version was suppose to be stiffer than the previous.

Title: Re: Assembly Instructions for Mo Best
Post by: john e. holliday on November 01, 2014, 08:59:11 AM

I now have the file on a disc and have read it.   Larry was beyond his time.   Need to get a set of plans.   Now will a LA 46 be enough power.   I think it would with the right venturi and prop.   

Title: Re: Assembly Instructions for Mo Best
Post by: Mike Griffin on November 01, 2014, 10:18:59 AM

Quote from: Robertc on October 31, 2014, 08:27:55 PM

Which fuse version you building?  Larry had at least three different versions.  I have Larry's computer files so if you have instructions for a different version, I should be able to help.  First version is just balsa fuse.  Second version is sheeted
from the back of the wing with the sheeting at 60 degree angle and third version has convex formers sheeted with either 1/32 or 1/64 ply.  The last version makes a very stiff fuse which was the idea.  Each version was suppose to be stiffer than the previous.

I just sent you a personal message Robert.  Thank you

Mike

Title: Re: Assembly Instructions for Mo Best
Post by: Leester on November 01, 2014, 11:45:12 AM

Doc, LAS 46 is just fine. That's what I had on mine and worked great.

Title: Re: Assembly Instructions for Mo Best
Post by: Robertc on November 01, 2014, 12:00:01 PM

I ran a 40FP on my first three MoBests and it worked fine.  The past two have had LA 46.  I think it is a great combo.
Larry ran 40 FPs, Silver Fox 40 and a Super Tiger 51.  All worked just fine.

Title: Re: Assembly Instructions for Mo Best
Post by: john e. holliday on November 01, 2014, 05:10:36 PM

Thanks for the info guys as I just found my plans when I went to do some more tidying up in the shop.