stunthanger.com

General control line discussion => Open Forum => Topic started by: donchandler on October 14, 2006, 07:34:01 PM

Title: ARF Nobler
Post by: donchandler on October 14, 2006, 07:34:01 PM

 :D I am about ready to do final assembly on the ARF Nobler. I allready tightened the mono coat, reglued were I could and redid the controls. Any other tips?

Don Chandler

Title: Re: ARF Nobler
Post by: Leester on October 14, 2006, 09:02:50 PM

Try to beef up the landing gear brackets, I added two more plastic clips and they still will bend on a not so smooth landing. Also make sure you have plenty of room to choke the venturi.

Title: Re: ARF Nobler
Post by: donchandler on October 16, 2006, 04:05:50 PM

Thanks for the tip. I never like two peace llanding gears. I'll take a close look.

Title: Re: ARF Nobler
Post by: john e. holliday on October 17, 2006, 12:04:34 PM

Had to reglue the landing gear mounts on my ARF Nobler before I left for Tulsa.  Should have flown it instead of the Oriental.  But, I now have the Oriental flying better.   DOC Holliday