News:



  • July 18, 2025, 12:20:14 PM

Login with username, password and session length

Author Topic: Anyone Familiar With This Engine?  (Read 1515 times)

Offline Robert Zambelli

  • 23 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 3076
Anyone Familiar With This Engine?
« on: February 11, 2022, 08:43:49 PM »
Bought this a few years back.
It's in LIKE-NEW condition.
I test ran it. It starts easily and with 15%-11/11 it turned a Rev-Up 10-6 wooden prop at around 9800 RPM.
Not sure of the displacement - a 29 or 35?

I will probably put it on an early 50s style profile.

Bob Z.

Offline De Hill

  • 24 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1197
Re: Anyone Familiar With This Engine?
« Reply #1 on: February 11, 2022, 09:39:42 PM »
Hi Bob,

It looks like a 1955 OK Cub .29.
De Hill

Offline Dennis Adamisin

  • 2019 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 4405
Re: Anyone Familiar With This Engine?
« Reply #2 on: February 12, 2022, 07:00:25 AM »
Never saw one run.  What does it weigh?  Looks like and incredibly light die casting especially compare to modern engines, Doubt it crashes very good though.

Going through my brother's stuff, found his Mohawk 29 (single exhaust) on a Ringmaster.  He took it to VSC several years ago. 
Denny Adamisin
Fort Wayne, IN

As I've grown older, I've learned that pleasing everyone is impossible, but pissing everyone off is a piece of cake!

Offline James Lee

  • 25 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 633
Re: Anyone Familiar With This Engine?
« Reply #3 on: February 12, 2022, 11:02:16 AM »
Denny
That brings up a great memory of David...    He and Art spent a lot of time in the shade under our tent that year.  so enjoyable!!   And I flew that Ringmaster with the OK.  The motor was a nice runner, just rather mild. 
We will miss him.
thanks
Jim

Offline Dennis Adamisin

  • 2019 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 4405
Re: Anyone Familiar With This Engine?
« Reply #4 on: February 12, 2022, 11:12:36 AM »
Denny
That brings up a great memory of David...    He and Art spent a lot of time in the shade under our tent that year.  so enjoyable!!   And I flew that Ringmaster with the OK.  The motor was a nice runner, just rather mild. 
We will miss him.
thanks
Jim

Dave got the biggest kick out of it too.  I have that old Ringer with the Mohawk on it sitting next to me as I type, Thinking I should build something appropriate & OTS for it..

Bob Z, sorry for the thread drift.
Denny Adamisin
Fort Wayne, IN

As I've grown older, I've learned that pleasing everyone is impossible, but pissing everyone off is a piece of cake!

Offline Howard Rush

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 7999
Re: Anyone Familiar With This Engine?
« Reply #5 on: February 12, 2022, 12:20:09 PM »
I had one.  It is a mechanism for converting methanol to noise.  It had no power.

Yes, I’m pretty sure that’s the .29. The .35 had a yellow thrust washer.
The Jive Combat Team
Making combat and stunt great again

Offline MikeyPratt

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 773
Re: Anyone Familiar With This Engine?
« Reply #6 on: February 12, 2022, 12:41:08 PM »
Hi Bob,
I think it’s a OK .35 “Hot Shot”, I had one when I was a kid.  It was my first big Motor that my Dad bought for me.  It ran pretty good but not the power of most, a McCoy Red Head 29 would kick it’s but.  It was perfect for light weight Ringmaster S-1 or Flying Clown ( used it to learn to fly upside down).

Later,
Mikey

Offline James Lee

  • 25 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 633
Re: Anyone Familiar With This Engine?
« Reply #7 on: February 12, 2022, 01:13:41 PM »
AMEE shows it as 1955 'OK' Cub 29, with red drive and tank.   The 35 had a gold prop drive and tank.
Jim

Online Peter in Fairfax, VA

  • 24 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1189
Re: Anyone Familiar With This Engine?
« Reply #8 on: February 12, 2022, 07:05:02 PM »
From the Dannels encyclopedia, a 1955 OK Cub .29, as mentioned before.  Got a copy of the Dannels book?

Offline Robert Zambelli

  • 23 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 3076
Re: Anyone Familiar With This Engine?
« Reply #9 on: February 13, 2022, 06:48:44 AM »
Howard you are correct.
Noise indeed!!   y1  y1
And I thought the Fox 59 was loud.
The OK would drown it right out.
In any case, it should do OK on a light plane.

Ty - I have a bunch of Mohawk 29s but I was not aware that they made a Mohawk 60.
Bob Z.


I had one.  It is a mechanism for converting methanol to noise.  It had no power.

Yes, I’m pretty sure that’s the .29. The .35 had a yellow thrust washer.

Offline EddyR

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 2574
Re: Anyone Familiar With This Engine?
« Reply #10 on: February 13, 2022, 04:46:45 PM »
Well    I thought one day this would show up with you saying what is this motor . You got it from me five years ago at Huntersville. It had a nice big tag on it saying Ok .29.  $50.  You also bought a Rustler .40 for $50. You made a big fuss over it and said you would send me a check for both motors . You only paid me for one and came up with a lame story that you paid me at the field. I gave every one s receipt that day as i sold almost every thing I had left. I asked  for a copy of the receipt and you refused. Never told anyone what you did but now everone knows.
 Ed Ruane
Locust NC 40 miles from the Huntersville field

Tags: