stunthanger.com
General control line discussion => Open Forum => Topic started by: Bootlegger on June 30, 2010, 11:31:26 AM
-
Tried shooting auto clear over some Rustoliem color paint? I put the Rust over clear not knowing that isn't supposed to work, so thought about shooting auto clear.
The rustolium is about three months old, should be cured.
Thanks, Gil
-
Try a test piece first!!!!! even if you have to make a piece with fresh paint. That will let you know if you are going to have a bad reaction. Also make the first two coats very light. If you can get away with two light coats you should be OK to shoot like you normally do. I have never tried auto clear over Rustoliem, but I have used it over various other things without many problems.
-
I agree with Derek! But, so far, I have not had a single problem shooting Automotive Urethane clear over anything. Started with Dupont Chromaclear (which they changed a while back) and now have NAPA house brand *bargain* grade auto urethane (would have to look at the can to get the name), still a 4-1 paint, but about as cheap a gallon as the quart of Chromaclear was. No difference in usage or it holding up for the past 4 years. In fact, I spilled some raw fuel on the Dupont once and I had to repair it. Not so with the *cheap* NAPA. ????? YMMV
Bill