stunthanger.com
General control line discussion => Open Forum => Topic started by: badbill on February 19, 2017, 11:42:09 AM
-
This time, a full size from the excellent RSM kit, electric power. Shown also with my TD .15 powered PDK Jr. Ring !
(https://i58.servimg.com/u/f58/19/31/11/27/rm110.jpg) (https://servimg.com/view/19311127/150)
(https://i58.servimg.com/u/f58/19/31/11/27/rm210.jpg) (https://servimg.com/view/19311127/151)
-
Nice job. What did you cover with? I bet the TD powered Junior is fast.
-
Nice !!!
You are a master at clear covering !!
-
Nice job. What did you cover with? I bet the TD powered Junior is fast.
The Big one is 100% Monokote, the Lil' one has a painted fuse and tail ( Lustrekote ) and Monokote wing. Yes, the little one is fast and will be even better when I get the tank height adjusted right y1
Nice !!!
You are a master at clear covering !!
Thanks Mike. It is one of the easiest colors to cover with, handles very well. On the larger plane, I used Monokote solvent to put the little squares on instead of ironing- It really works a treat, should have tried it earlier!
-
Both planes look great. Now the Junior if it is too fast, try a lower pitch prop. I did the with my Sweet Sweep yesterday on the third flight. Mucho easier on this old man.
-
Both planes look great. Now the Junior if it is too fast, try a lower pitch prop. I did the with my Sweet Sweep yesterday on the third flight. Mucho easier on this old man.
There's no such thing as "too fast" with a Ringmaster y1
-
Beautiful planes!
-
Both planes look great. Now the Junior if it is too fast, try a lower pitch prop. I did the with my Sweet Sweep yesterday on the third flight. Mucho easier on this old man.
[/quote
Hey John......where are you flying now days? Did you have any other C/L fliers at your flying field yesterday? Inquiring minds want to know. D>K D>K H^^
-
Dave and I are flying at what is or I call Frisbee Park of Shawnee. It is off of K-7 and 43rd Street south of Bonner Springs KS. Was out today hoping to catch the turds that keep tearing up the grass. Too windy, so I ran the engines on a couple of planes that hadn't been flown for a while. Had to pull one engine as the needle valve would not turn and the extension kept popping off.
-
Here's a video of the Ringmaster flying yesterday. I didn't use the motor shown above, went with a Cobra instead and am glad I did! Great flyer.
https://www.youtube.com/watch?time_continue=1&v=45d2JFbimQ0